Diifferences in BX Loaders

   / Diifferences in BX Loaders #1  

robertm

Veteran Member
Joined
Jun 3, 2002
Messages
1,124
Location
Northern Illinois
Tractor
Kubota BX2660
Where is the difference in the loader on the BX25D that allows the bucket to dump so far... like 180 degrees from curled? The specs show the same max dump angle, cylinder size, and looking at my BX2660, I could never get the bucket in the position the BX25 does when using the bucket as a stabilizer when using the hoe. Just curious. Is it just the center cylinder has a longer stroke?
 
   / Diifferences in BX Loaders #2  
Where is the difference in the loader on the BX25D that allows the bucket to dump so far... like 180 degrees from curled? The specs show the same max dump angle, cylinder size, and looking at my BX2660, I could never get the bucket in the position the BX25 does when using the bucket as a stabilizer when using the hoe. Just curious. Is it just the center cylinder has a longer stroke?

Hmm, never noticed any difference between the dump angle on my BX25 and old BX1860 unless this a change between the BX25 and BX25D. You've piqued my curiosity.
 
   / Diifferences in BX Loaders #3  
Looking at buying a BX25D so I'm subscribed
 
   / Diifferences in BX Loaders
  • Thread Starter
#4  
Kubotas website shows a BX25D with the mouth of the bucket almost face down in the dirt. My BX2660 has nowhere close to that dump angle.
 
   / Diifferences in BX Loaders #5  
This photo?

Bruce


BX-Series-BX25-Backhoe.jpg
 

Tractor & Equipment Auctions

2008 Ford F-250 Reading Service Truck (A50323)
2008 Ford F-250...
PALLET OF TARPS, UMBRELLAS, AND PORTABLE SHADES (A50854)
PALLET OF TARPS...
2014 GOOSENECK DRIVER SIMULATOR TRAILER (A50854)
2014 GOOSENECK...
2023 PETERBILT 579 TANDEM AXLE SLEEPER (A51222)
2023 PETERBILT 579...
TAKEUCHI TB2150 EXCAVATOR (A51242)
TAKEUCHI TB2150...
2009 L3 GENERATOR SET (A51222)
2009 L3 GENERATOR...
 
Top