Buying Advice Small CUT or large SCUT Advice

   / Small CUT or large SCUT Advice #71  
Don't forget that a tiller and mower deck probably add $5K.

The J2023 will be a smaller frame, but it seems a little nicer featured compared to the G Series. The G Series is what they call their "value compact" model. Just a little cheaper looking on the details. The G is a much heavier tractor.

Price on the J2023 seems high. I just ordered a brand new one for $12,200 with a loader. I was quoted a little over $5k for the LS backhoe installed with the auxiliary remote. So call it $17,500 in a TLB configuration. If it were me, I'd save some money and try to find lightly used attachments locally on Craigslist.
 
   / Small CUT or large SCUT Advice #72  
It was a little more than $3000 higher for the G3033H from my dealer.

I was actually talking about the price difference between the 3033 and 3038. The 3038 has 300lbs more FEL lift capacity, which can make a big difference....it's almost 20% extra :)
 
   / Small CUT or large SCUT Advice
  • Thread Starter
#73  
I was actually talking about the price difference between the 3033 and 3038. The 3038 has 300lbs more FEL lift capacity, which can make a big difference....it's almost 20% extra :)

I gotcha. Wouldn't think there would be much price difference between those two models then.
 
   / Small CUT or large SCUT Advice
  • Thread Starter
#74  
Don't forget that a tiller and mower deck probably add $5K.

That's why I recommended looking for used. 5ft tillers in my area sell new for $1500-$1600. I would say the OP could easily by a new brush hog and new tiller for about $2500. Used would be even cheaper.
 
   / Small CUT or large SCUT Advice
  • Thread Starter
#75  
I went down to see my family this weekend and I was telling my dad about the new LS tractor that I ordered and how excited I was to start playing with it. He got this big smile and said he got a new tractor too and wanted to know if I wanted to play with it for a while. He took me around to the back of the shop. This is what I saw and my jaw hit the floor. He's such a one-upper. :)

ForumRunner_20140325_102122.png
 
   / Small CUT or large SCUT Advice #76  
I went down to see my family this weekend and I was telling my dad about the new LS tractor that I ordered and how excited I was to start playing with it. He got this big smile and said he got a new tractor too and wanted to know if I wanted to play with it for a while. He took me around to the back of the shop. This is what I saw and my jaw hit the floor. He's such a one-upper. :)

View attachment 367169

:eek:
 

Tractor & Equipment Auctions

KUBOTA L4630D TRACTOR (A51243)
KUBOTA L4630D...
10' Feed Bunk (A50515)
10' Feed Bunk (A50515)
CASE TV370B SKID STEER (A51242)
CASE TV370B SKID...
2017 Isuzu NPR Stake Body (A47384)
2017 Isuzu NPR...
UNUSED AGT MH12RX EXCAVATOR (A51243)
UNUSED AGT MH12RX...
5' X 20' 3/8" THICK STEEL PLATE (4) PIECES (A51244)
5' X 20' 3/8"...
 
Top