120-Volt Mig welder.

Status
Not open for further replies.
   / 120-Volt Mig welder. #21  
Sure, we all have one. If Sodo is willing, he is more than welcome to bring his welder over so we can do some testing together:cool2:. He is only an hour from me.
I'm sure this welder is at the bottom of the pecking order. I'd really like to try a top of the line 120-volt Mig welder.;)
When it comes to 120V welders you remind me of the black knight in Monty Python's ' The Search for the Holy Grail'...:D
 
   / 120-Volt Mig welder. #24  
:confused3: etc...

Be sure to watch the entire video clip...!

 
   / 120-Volt Mig welder. #25  
Okay SA, you got me going so I decided to go out in the shop and weld up a 1/8in piece of scrap using my Miller 211 on 110v. It's 90deg plus in my garage but I couldn't stand the local news anymore tonight anyways.

One side weld was set on Auto feed for 1/8in .030wire. The other side was done off the Miller chart inside the case... manual setting is 6/60 on the volt scale and wire feed (whatever that means?). Which weld do you 'like' better? Can you tell any difference? One better than the other? Voltage setting was about 10% higher on one side. Wire feed I have no clue since auto feed setting doesn't tell you what the rate is so no idea. I also have no idea whether this post has any value at all... but it sure felt good to weld than whine.

IMG_2568.jpg IMG_2567.jpg
 
   / 120-Volt Mig welder. #26  
:confused3: etc...

Be sure to watch the entire video clip...!

A classic! Gets better every time I have seen it, and I wouldn't mention how many times I have seen it! :D
 
   / 120-Volt Mig welder. #27  
Okay SA, you got me going so I decided to go out in the shop and weld up a 1/8in piece of scrap using my Miller 211 on 110v. It's 90deg plus in my garage but I couldn't stand the local news anymore tonight anyways.

One side weld was set on Auto feed for 1/8in .030wire. The other side was done off the Miller chart inside the case... manual setting is 6/60 on the volt scale and wire feed (whatever that means?). Which weld do you 'like' better? Can you tell any difference? One better than the other? Voltage setting was about 10% higher on one side. Wire feed I have no clue since auto feed setting doesn't tell you what the rate is so no idea. I also have no idea whether this post has any value at all... but it sure felt good to weld than whine.

View attachment 386190 View attachment 386189

They're both decent welds. Maybe a little slow on travel speed. Typically more volts gives you a wider flatter bead. I'd guess the second weld had the higher volt setting because it's a little flatter profile.
 
   / 120-Volt Mig welder. #28  
They're both decent welds. Maybe a little slow on travel speed. Typically more volts gives you a wider flatter bead. I'd guess the second weld had the higher volt setting because it's a little flatter profile.
Hey Arc, I will take 'decent' as a compliment... I am still and probably always will be a 'hack'. Actually the second pic was a bit lower volt setting (manual setting) but like I said, I don't know what the wire speed was on the first one, so the second pic could have been at a slower wire speed (making it hotter, right?) hence flatter? I think my travel speed was about the same for both. Curious though... I thought my travel speed was good (totally based on looks) but could you tell me why you think 'a little slow'?
 
   / 120-Volt Mig welder. #30  
Wow
Nothing bad prior to 3:37 then pruned at 4:52. Must have missed something in that hour and fifteen minutes

Dang I missed it too.

:popcorntub:

I'm outta town until September though, can't do much until then. Curious How a "Lincoln 100" specs compare to a "Miller 135" specs.
 
Status
Not open for further replies.

Tractor & Equipment Auctions

AMCO F42B-3626CS 13ft Pull-Behind Wheel Offset Harrow Tiller (A49461)
AMCO F42B-3626CS...
2007 Volvo VNL Truck Tractor (A51039)
2007 Volvo VNL...
2017 terex warrior 1800 screener (A50322)
2017 terex warrior...
2013 MACK PINNACLE CHU613 DAY CAB (A50854)
2013 MACK PINNACLE...
Lay-Mor Sweepmaster 400 Broom Sweeper (A49461)
Lay-Mor...
2020 Barreto 20RTK 36in Stand-On Trencher (A49461)
2020 Barreto 20RTK...
 
Top