BX2360 Upgrades

[94BULLITT]

Thanks Bill.

 

[KBOTA1]

How are the stabilizers working on the BX? I sent anemail inguiry to Stabliworks this morning to get a cost estimate and delivery date.

You guys have some really great BX ideas!

 

[RaydaKub]

How are the stabilizers working on the BX? I sent anemail inguiry to Stabliworks this morning to get a cost estimate and delivery date.

You guys have some really great BX ideas!

I'm not sure who you are asking, but I'll add my $0.02 anyway. I got mine in October. I love 'em. I only have a rear.blade or weight bar to mount so that isn't where they shine for me (although I can see that being very helpful). I use mine while removing snow. I use my bucket and blade both for snow. For the bucket, there is always spill off the sides. I can swing my blade from one side to the other in a second and catch the spill and pull it back to one side so I don't have to do the whole driveway over and over. It's awesome to make an adjustment so easily.

 

[The Fred]

Roger hasn't posted here in 1 month. He may be mad at the fred for putting a turbine on his tractor and it worked.

Fred, hope he's ok!

 

[Happy Gilmore]

Let's bring this one back

 

[94BULLITT]

Let's bring this one back

I have had a toolbox I want to put on the BX for a along time but I have not had a chance to put it on. There are also a couple of other things I want to do.

 

[94BULLITT]

All great ideas, and all great workmanship! :thumbsup:

Roger, those are some good-looking welds. Are they TIG, MIG or ?

And what did you use to cut the holes with?

Thanks,

My Hoe

Sorry, I just saw your reply and it is a year and half old. I was looking through this thread at pictures of the BX trying to figure out where I could add a chain holder and noticed it. Thanks, for the compliments. The welds were done with a MIG. I can't remember what I cut the holes with since it has been so long. I remember thinking about using a hole saw but I don't know if that is what I used.

 

[ryanmad2000]

LED strip is the roll bar is awesome...can you provide some links to the product you used? Any wiring help?

 

[94BULLITT]

LED strip is the roll bar is awesome...can you provide some links to the product you used? Any wiring help?

Thanks, if you look on ebay or amazon search LED PVC light strip. I used 3m double faced tape to secure it to the ROPS. I believe there is a pic with part number earlier in this thread.

For the wiring I took apart the connector at the left tail light and put hot wire in it and hooked the ground to the signal. The strip comes on with the taillights, hazard lights, and left signal.

 

[94BULLITT]

Here is my horn install.

Here is the horn button.



Here is the horn. It is under the dash above the fuse box.