Lets see your Mahindra!

[mike69440]

3016 Gear...delivered 4/22 and a bit over 80 hours put on it since.

Gravel isn't the best quality...but free and more than I'll likely use in my lifetime...

80 Hours!?, How is it so clean?

 

[metalcaster]

Here is mine,2015 1538 HST. Just got the BH last week.

 

[TomSeller]

Here is mine,2015 1538 HST. Just got the BH last week.

Very nice. Does the seat flip around for backhoe use on that model?

 

[slefebvre]

My 4035 picked up a ton of wood pellets like a champ!

 

[metalcaster]

Yes the seat raises then spins to the left. Dug out about a dozen sassafras and cherry stumps so far. Only problem so far exists between the black knots and that seat.

 

[bindian]

Yes the seat raises then spins to the left. Dug out about a dozen sassafras and cherry stumps so far. Only problem so far exists between the black knots and that seat.

Did you mean to say, "black knobs"? Don't worry, you'll get used to it soon enough.
hugs, Brandi

 

[mike69440]

Re: Lets see your Mahindra!, My enhancements (i.e. Mods)

Link to my photo's are in this thread (Post #2).

http://www.tractorbynet.com/forums/.../343307-50-hour-mahindra-max28xl-shuttle.html


PS
How do you phost a large photo in the phost? i.e., not as an attachment?

 

[linuxman51]

the 26 has been putting in work lately, clearing space for a shop
bxpanded toothbar is no joke at all.

just about done with it's bucket modz
weld on items to help pick various things up

pipe extenders to make it a little easier to move brush around (still need to drill some pilot holes to put some lock pins in)

may get modified further depending on utility, etc.

 

[mike69440]

the 26 has been putting in work lately, clearing space for a shop
bxpanded toothbar is no joke at all.

just about done with it's bucket modz
weld on items to help pick various things up

pipe extenders to make it a little easier to move brush around (still need to drill some pilot holes to put some lock pins in)

may get modified further depending on utility, etc.

Nice that you have a TIG Welder and the skill to use it. Dont forget to weld sime side cutting edges to the bucket.

As I have a bigger tractor with teeth on the bucket, plus an excavator with dozer blade, a BX tooth Bar would only have me doing stuff I shouldn't with the Max 28. My little bucket is good for tiny grading jobs, and it sure makes for a nice no sweat or back strain required wheelbarrow.

 

[mike69440]

the 26 has been putting in work lately, clearing space for a shop
bxpanded toothbar is no joke at all.

just about done with it's bucket modz
weld on items to help pick various things up

pipe extenders to make it a little easier to move brush around (still need to drill some pilot holes to put some lock pins in)

may get modified further depending on utility, etc.

Nice that you have a TIG Welder and the skill to use it. Dont forget to weld sime side cutting edges to the bucket.

As I have a bigger tractor with teeth on the bucket, plus an excavator with dozer blade, a BX tooth Bar would only have me doing stuff I shouldn't with the Max 28. My little bucket is good for tiny grading jobs, and it sure makes for a nice no sweat or back strain required wheelbarrow.

PS, Like your SSQA.