My NX6010

   / My NX6010 #941  
Um, have you been following this thread? Eric pretty much does put a ton of hours on his construction equipment, his tractor. I should think it needs a lot of grease. Also, I think he has some back problems, so maybe the foot operation is easier for him.

I do think it might be a little overkill though.

Must of missed it myself. What else did he buy besides a tractor?
 
   / My NX6010
  • Thread Starter
#942  
Must of missed it myself. What else did he buy besides a tractor?

Murphy, I'm disabled, hate changing out canisters of grease every third greasing, don't have a heated shop to service things, and am leaving my tractor in the cold where I use it in all weather conditions. If I purchased a lithium battery-operated grease gun that would not work as well in the cold, would you also question why I did so?

I hope the G.Gun turns out to be everything I hope it to be as greasing stuff is painful for me.
 
Last edited:
   / My NX6010 #943  
Murphy, I'm disabled, hate changing out canisters of grease every third greasing, don't have a heated shop to service things, and am leaving my tractor in the cold where I use it in all weather conditions. If I purchased a lithium battery-operated grease gun that would not work as well in the cold, would you also question why I did so?

I hope the G.Gun turns out to be everything I hope it to be as greasing stuff is painful for me.

Relax... I only asked if you bought something else. I hope your GGun works for you too.
 
Last edited:
   / My NX6010
  • Thread Starter
#944  
The following video is a summary review of my tractor's popping out of range and was made primarily for my Kioti dealer's senior technician to review as needed.

 
   / My NX6010 #945  
   / My NX6010 #946  
I'm surprised the G.Gun is only $168.
 
   / My NX6010
  • Thread Starter
#947  
I'm surprised the G.Gun is only $168.

So am I. I paid something like $295 through Amazon Prime.

21871703680_9dffeeb121_o.jpg
 
   / My NX6010
  • Thread Starter
#948  
For those who are interested in my draw bridge dock, I made a video taking in my dock a couple of days ago.

 
   / My NX6010
  • Thread Starter
#949  
I also made a video spreading sifted top soil in a confined area covering the now replaced septic lift line.

21871078740_a0a812f3ec_h.jpg



Oh, and just this evening I accepted an offer on the city house. There are a number of standard contingencies (financing, assessing, interest rate lock-in), but as soon as those cook off, I can hang my sold flag on my real estate sign! :)
 
   / My NX6010 #950  
For those who are interested in my draw bridge dock, I made a video taking in my dock a couple of days ago.

Congrats on your dock project.For a guy who is disabled you seem to get a lot of projects done.
 
Last edited:

Tractor & Equipment Auctions

2018 HINO 258 S/A SERVICE TRUCK (A51243)
2018 HINO 258 S/A...
Brent 420 Grain Cart (A50514)
Brent 420 Grain...
1265 (A50490)
1265 (A50490)
1273 (A50490)
1273 (A50490)
2014 CHEVROLET SILVERADO (A50854)
2014 CHEVROLET...
1998 Dorsey Trailer, VIN # 1DTP16K29WG052604 (A48836)
1998 Dorsey...
 
Top