My NX6010

   / My NX6010 #941  
Um, have you been following this thread? Eric pretty much does put a ton of hours on his construction equipment, his tractor. I should think it needs a lot of grease. Also, I think he has some back problems, so maybe the foot operation is easier for him.

I do think it might be a little overkill though.

Must of missed it myself. What else did he buy besides a tractor?
 
   / My NX6010
  • Thread Starter
#942  
Must of missed it myself. What else did he buy besides a tractor?

Murphy, I'm disabled, hate changing out canisters of grease every third greasing, don't have a heated shop to service things, and am leaving my tractor in the cold where I use it in all weather conditions. If I purchased a lithium battery-operated grease gun that would not work as well in the cold, would you also question why I did so?

I hope the G.Gun turns out to be everything I hope it to be as greasing stuff is painful for me.
 
Last edited:
   / My NX6010 #943  
Murphy, I'm disabled, hate changing out canisters of grease every third greasing, don't have a heated shop to service things, and am leaving my tractor in the cold where I use it in all weather conditions. If I purchased a lithium battery-operated grease gun that would not work as well in the cold, would you also question why I did so?

I hope the G.Gun turns out to be everything I hope it to be as greasing stuff is painful for me.

Relax... I only asked if you bought something else. I hope your GGun works for you too.
 
Last edited:
   / My NX6010
  • Thread Starter
#944  
The following video is a summary review of my tractor's popping out of range and was made primarily for my Kioti dealer's senior technician to review as needed.

 
   / My NX6010 #945  
   / My NX6010 #946  
I'm surprised the G.Gun is only $168.
 
   / My NX6010
  • Thread Starter
#947  
I'm surprised the G.Gun is only $168.

So am I. I paid something like $295 through Amazon Prime.

21871703680_9dffeeb121_o.jpg
 
   / My NX6010
  • Thread Starter
#948  
For those who are interested in my draw bridge dock, I made a video taking in my dock a couple of days ago.

 
   / My NX6010
  • Thread Starter
#949  
I also made a video spreading sifted top soil in a confined area covering the now replaced septic lift line.

21871078740_a0a812f3ec_h.jpg



Oh, and just this evening I accepted an offer on the city house. There are a number of standard contingencies (financing, assessing, interest rate lock-in), but as soon as those cook off, I can hang my sold flag on my real estate sign! :)
 
   / My NX6010 #950  
For those who are interested in my draw bridge dock, I made a video taking in my dock a couple of days ago.

Congrats on your dock project.For a guy who is disabled you seem to get a lot of projects done.
 
Last edited:

Tractor & Equipment Auctions

2018 CATERPILLAR 249D TRACKED SKID (A51222)
2018 CATERPILLAR...
2011 MAGNUM PRODUCTS LIGHT TOWER/WATER TANK TRAILER (A50854)
2011 MAGNUM...
2016 FORD TRANSIT 250 VAN (A51406)
2016 FORD TRANSIT...
197637 (A50459)
197637 (A50459)
2012 INTERNATIONAL 4300 26 FT BOX TRUCK (A51219)
2012 INTERNATIONAL...
2017 RAM PROMASTER 2500 CARGO VAN (A51222)
2017 RAM PROMASTER...
 
Top