How often does your tractor Regen?

[sandyc]

When I work it hard it will regen every 25 hours or so. Just dubbing around it will want to clear its throat every 15 hours or so.

 

[robert421960]

Here is the regens for my tractor:

Date	Hours	Elapsed
01-17-15	16.0	16.0
02-28-15	28.8	12.8
03-29-15	40.0	11.2
05-05-15	53.1	13.1
07-14-15	68.6	15.5
10-24-15	81.5	12.9

do you let your tractor idle alot?
I have had one regen and am at 61 hours now
my tractor at work has had 2 at 90 hours
both are l3301

 

[Ivan49]

On my 3301 I had the first regen at 15 hours and the second at 49 hours. When the second ne happened I was plowing snow and I did not even know it was in the regen mode until I saw the light flashing. I usually run mine around 2000 rpms and when I can I open it right up

 

[sandalwood]

Only about 14 hrs on my 5460 and DPF reading about 55% (?full).

Most people have commented on hrs to regeneration, anyone noticed what % their DPF was before regeneration triggered?

Thanks

 

[sandalwood]

Only about 14 hrs on my 5460 and DPF reading about 55% (?full).

Most people have commented on hrs to regeneration, anyone noticed what % their DPF was before regeneration triggered?

Thanks

 

[farmer2009]

My MX5200 seems to want to regen after burning 1/2-2/3 of a tank of fuel. Only had 2 one at 7.3 hours while mowing and moving gravel. The other at 27.6 hours after a lot of idling. I'm above 35 hours now. Both used about that much fuel. I don't run my tanks real low unless I'm running a tank a day. I'll refuel before a quarter of a tank.

 

[mdhughes]

Only about 14 hrs on my 5460 and DPF reading about 55% (?full).

Most people have commented on hrs to regeneration, anyone noticed what % their DPF was before regeneration triggered?

Thanks

I wish the L3901 had a way to display the percentage, but all we get is an hour meter. I think it will also display error codes.

 

[mdhughes]

Only about 14 hrs on my 5460 and DPF reading about 55% (?full).

Most people have commented on hrs to regeneration, anyone noticed what % their DPF was before regeneration triggered?

Thanks

I wish the L3901 had a way to display the percentage, but all we get is an hour meter. I think it will also display error codes.

 

[lennyzx11]

Second time for regen yesterday for my 2015 L3301/HST.
1. 15.1 hours
2. 29 hours

This tells me to quit babying it I guess but according to manual don't run it hard for first 50 hours.

 

[lennyzx11]

Third time for regen yesterday for my 2015 L3301/HST. No issues so far regarding it.

1. 15.1 hours
2. 29 hours
3. 59 hours

This tells me to quit babying it I guess but according to manual don't run it hard for first 50 hours.