Good morning!!!!

[300UGUY]

I had a mouse build a nest in a s10 I that was a daily driver. I was driving down the road, had smoke coming out! I found a big nest there, cleaned it out, then continued on. It cost me a new set of plug wires.

A little gloomy here, looks like a little snow here.

 

[bakerg]

Good morning, another windy day here, 30F heading to 36F.
Roy, good to here truck is repaired and that you had a honest mechanic, there are some shaddy ones out there.

 

[txdon]

Roy, did you get the old (but working) fuel pump?

 

[Larro Darro]

Good Morning. 1015, overcast, 51F with 94% humidity. Forecast high of 56F with 40% chance of rain today, and a low of 40F tonight. Weatherunderground says we got .36" since midnight, but the old finger in the five gallon bucket method shows a little over an inch for the night. I'm just getting in from the camp, and while rain on a tarp shelter is loud, having a mouse decide he's at home in your camp is even noisier. Every step he took during the night was on a tarp, and I could hear it.

I did get started back on a cobbing project this morning. I was doing a little shoveling in my hole and was finding so much good sand and clay, I took a break to go down to the pond and cut some straw. Since I found my slingblade, I want to cut some briars here at the house where I start my trees, then I'm going back to work on my reflective fireplace.

You guys have a good one,

Larro

 

[sodamo]

68°F and no rain
Be safe
Have a great day

 

[RedNeckGeek]

PW is back together and working as designed, thanks to the morning crew especially RNG.

More due to your elbow grease and persistence! :thumbsup:

Yesterday we got new chairs for the dining table. They were all arm chairs that swivel, rock and roll, and did not fit under the table. Since the table is a early 1900 oak table and was low for the smaller people back then, I raised the round legs up two inches with these from Lowes Shop 2-1/2-in Beech-Birch-Hickory Classic Bun Feet Wood Table Leg at Lowes.com

It came out good. Two projects complete in one day I need to slow down.

That table looks like it was born that way. Nice job!

Mind sharing the make and model of those chairs? Been shopping for a new kitchen table setup, and when I say I want swivel rockers on rollers for chairs they look at me like I have three eyeballs or something. :confused2:

 

[sodamo]

Nice table, Don

 

[txdon]

Mind sharing the make and model of those chairs? Been shopping for a new kitchen table setup, and when I say I want swivel rockers on rollers for chairs they look at me like I have three eyeballs or something. :confused2:

Chairs-Wakefield Swivel Chair

 

[toppop52]

Upper 40's today with milky sunshine, low 40's and windy tomorrow. Started wiring my tractor shed today, got the cable trenched in and connected to the electric box.

 

[Thall303]

Good morning! 31˚ heading to 71˚ sunny - nice day when it warms up a bit.

Roy, my Moms new Camery had a mouse nest in the air filter also but she only drives it twice a week. I guess they can't put screens in the air entrance.

PW is back together and working as designed, thanks to the morning crew especially RNG.

Yesterday we got new chairs for the dining table. They were all arm chairs that swivel, rock and roll, and did not fit under the table. Since the table is a early 1900 oak table and was low for the smaller people back then, I raised the round legs up two inches with these from Lowes Shop 2-1/2-in Beech-Birch-Hickory Classic Bun Feet Wood Table Leg at Lowes.com

It came out good. Two projects complete in one day I need to slow down.

Beautiful table