Backhoe Grease Zerk KB2376

   / Grease Zerk KB2376 #1  

ron45

Gold Member
Joined
May 12, 2012
Messages
258
Location
N.M.
Tractor
Kioti LK3054XS
I was told by a kioti dealer I needed 1/8 inch pipe threads, this is not correct. The portion of the zerk that looks like a bolt head is METRIC not SAE, Weather or not there are metric pipe threads remains to be seen.

Is there anyone who still has an LK 3054 BH FEL who knows the size of the grease zerks that go on a KB2376 backhoe model?


Thanks for listening
Ron
 
   / Grease Zerk KB2376 #2  
Covered in depth here more than once. 1/8" British Standard Pipe Tapered, commonly called BSPT. Your Kioti dealer ought to have them in stock.
 
   / Grease Zerk KB2376 #3  
Or go to Tractor Supply and get a variety pack of zerk fittings...
 
   / Grease Zerk KB2376
  • Thread Starter
#6  
Thanks Murphy, So, how does one come in to possession of these illusive zerks? I have the decoder ring and the hand shake all polished up and ready to employ if I can just find the guy that has them. Some kind of identifier would go a long way on my quest for the golden zerk.

Ron
 
   / Grease Zerk KB2376 #7  
Thanks Murphy, So, how does one come in to possession of these illusive zerks? I have the decoder ring and the hand shake all polished up and ready to employ if I can just find the guy that has them. Some kind of identifier would go a long way on my quest for the golden zerk.

Ron

At your friendly neighborhood dealer. Ask nicely. Pass on the handshake though as he might think you're queer.
 
   / Grease Zerk KB2376 #10  
Ron, I started a thread here not long ago about this subject. What I found out is as follows. I have an Kioti NX4510 HST with back hoe and front end loader and needed a Zirk fitting. The thread is 1/8-27 taper NPT. However, the nut part is metric. A bit smaller than the standard nut part found on most Zirk fittings. What happens is the socket does not fit the recessed hole that the Zirk fits into. Buy a standard socket and turn it down to fit the hole the Zirk goes into and your in business. Good luck and I hope this helps. Bob
 

Tractor & Equipment Auctions

2011 CATERPILLAR M318D MOBILE EXCAVATOR (A51242)
2011 CATERPILLAR...
2017 Yale GLC050VX 3,500 lb LPG Forklift - Powershift, Aux Hydraulics (A51039)
2017 Yale GLC050VX...
2003 MACK RD688S T/A DUMP TRUCK (A51406)
2003 MACK RD688S...
Mitsubishi FG35 Forklift - 8,000lb Lift Capacity, LP Gas (A51039)
Mitsubishi FG35...
2016 Ford F-450 Crew Cab Knapheide Service Truck (A49461)
2016 Ford F-450...
2012 MACK CHU613 (INOPERABLE) (A50854)
2012 MACK CHU613...
 
Top