pto question

[Ianvictor]

hello, hoping someone can inform me as to wether it is possible to reverse the pto output on a iseki tx13000f ? i have looked at the various operating levers but cant see one that says 'pto reverse'. thank you. Ian

 

[topbuilder]

No reverse, Only goes one direction.

 

[Ianvictor]

No reverse, Only goes one direction.

Ok, thank you for the quick reply.

I figure the best thing is maybe to try the tiller with the tines as they are and see how they perform?
I have read a number of posts suggesting that forward direction tilling is better for riding over any obstacles, small rocks and pebbles and that is the the direction the tiller is operating but the tines are facing the opposite way?
Or can you tell me have I got it wrong?


Cheers Ian

 

[topbuilder]

If you were standing on the drivers side of the tiller, the rotation of the tines is CCW yes?

 

[Ianvictor]

Sorry a bit new

 

[Ianvictor]

Yes, that is correct they move CCw from the drive side, but should I expect the point of the tine to hit the soil first?

 

[topbuilder]

I'm not sure. Can you show us a pic? It seems like everything is ok. Bolens does not have a backaswards pto direction. Unless you have a left handed 'tiller, you should be ok.

 

[Ianvictor]

hopefully can? not the best picture but hopefully you can see the position/direction of the tines,and of course that they go anti clockwise.

cheers Ian

edit ok thanks for your replys, i have looked on youtube at different tillers in operation and they all appear to turn in the same diection and with the tines in the same direction as mine? so all should be good? its just not the directions i expected the tines to operate!


ok thanks again Ian

 

[topbuilder]

Great, glad you worked through it. Much better than walking with one eye closed.:thumbsup:

 

[Ianvictor]

Thanks again Topbuilder, your help is much appreciated, cheers Ian