Tx Jim
New Member
Is the top casting # T25295?
JD 1020 power steering
- Thread starter historyan1975
- Start date
- Views: 94013
-
- Tags
- john deere 1020
OP
historyan1975
Silver Member
T25285 and T29389...
OP
historyan1975
Silver Member
Hi, JIm.
Today I repplaced the PS column.... Now I have a longer PS column, but its not really working...
I drived after changing it. It seems to me that sometimes it is working and sometimes not. I also tried the 3point lifting - it works, but sometimes responds to noving of the wheel.... sometimes dips, but if I move a litle bit on the wheel it lifting works again normally.
Sometimes is working to left, other time only the right, sometimes uphil, other time only incline....
I dont understand it, maybe a long screw is tight, thought is lubricated normally now....now there is oil pression--
If there existed air in the system - it hade to be gone.....till now.
Today I repplaced the PS column.... Now I have a longer PS column, but its not really working...
I drived after changing it. It seems to me that sometimes it is working and sometimes not. I also tried the 3point lifting - it works, but sometimes responds to noving of the wheel.... sometimes dips, but if I move a litle bit on the wheel it lifting works again normally.
Sometimes is working to left, other time only the right, sometimes uphil, other time only incline....
I dont understand it, maybe a long screw is tight, thought is lubricated normally now....now there is oil pression--
If there existed air in the system - it hade to be gone.....till now.
Attachments
Tx Jim
New Member
I have never seen a power steering valve housing neck that long. Is this the housing with casting # T25285?
Jim, it appears to be a steering valve from a 2840 or a 3130. A few other models as well. It is the same lower housing with an extension screwed on along with a longer steering shaft. It should work the same as his original. Lower housing should be marked T25295 and extension is T28270. I am guessing from his symptoms, there are some blown orings in steering valve and in rockshaft valve.
OP
historyan1975
Silver Member
The first number is T25285...and the second # is T28388....
The seller told me that according to the catalog, this stering valve must be right for my JD1020. And hi has really right - every screw, caliber, the oil pipe join, gaskets a.s.o all are fitting perfectlly.
The bottom sequence is similar with the old stering valve column, but an the top part is longered with a 19 centimetres part, as you can see on the attached photo.
The seller told me that according to the catalog, this stering valve must be right for my JD1020. And hi has really right - every screw, caliber, the oil pipe join, gaskets a.s.o all are fitting perfectlly.
The bottom sequence is similar with the old stering valve column, but an the top part is longered with a 19 centimetres part, as you can see on the attached photo.
Last edited:
Tx Jim
New Member
OP
historyan1975
Silver Member
Hi...
I also used te tractor today..but the PS is not working. It is working exactly as the old one. I plan to try to pick apart the old PS... In order to watch what is contain and try to fix it with a new garniture. If I move slowly the wheel...sometimes is working for a few moments than its not working again. Now this new PS I have oil lubrication. The garniture and O-rings problems can be usually seen with the eye or has to be changed totally?!
What should I do?!
I also used te tractor today..but the PS is not working. It is working exactly as the old one. I plan to try to pick apart the old PS... In order to watch what is contain and try to fix it with a new garniture. If I move slowly the wheel...sometimes is working for a few moments than its not working again. Now this new PS I have oil lubrication. The garniture and O-rings problems can be usually seen with the eye or has to be changed totally?!
What should I do?!
OP
historyan1975
Silver Member
Tx Jim or JD110...
Could you please confirm if these two codes - AT26188 or AT315816 - (John Deere 1020 power steering repair kit codes) are good for my JD 1020 power steering?!
Thanks...
Could you please confirm if these two codes - AT26188 or AT315816 - (John Deere 1020 power steering repair kit codes) are good for my JD 1020 power steering?!
Thanks...
Tx Jim
New Member
Yes either part number( AT26188 or AT3158160) kit should fit your tractors steering valve.