Workshop Insulation

[KennyG]

I also "zoned" my lights with one switch for those in the area I usually work and another for the lights (with less density) in the "storage" area. Finally, i have a third switch that controls additional lights over the workbenches to effectively double the light there.

 

[teejk]

I also "zoned" my lights with one switch for those in the area I usually work and another for the lights (with less density) in the "storage" area. Finally, i have a third switch that controls additional lights over the workbenches to effectively double the light there.

I built my shop 6 years ago (before LED lighting). I keep watching for developments on lighting that might make it more efficient and having outlets ever 10' permits task lighting. In the meantime my 10' ceilings in my 30'x40' heated space with bright white steel on top lights it up like your typical retail store. Draw-backs are #1 florescent fixtures interfere with AM radio #2 I now know why the electronic ballasts are warranted for 5 years...they seem to last for 5 years plus 2 weeks...

 

[jack707]

Spray foam would be nice but it will grow outside the barn walls that's the only setback

 

[jadefox]

Thanks all! All of this is very helpful. Our three new interior walls are built, and I went the Big Box to get a 250' of 12-2 wire so I can rough in the electric. I noticed they were having a sale on fiberglass insulation, and I was thinking of putting R-13 or R15 in the three interior walls. My studs are rough cut hemlock at an honest 4". I plan to panel the aisle side of the barn with reclaimed barn wood to maintain the character. Thoughts? We have not yet decided how to cover the shop side of the wall or how to insulate the exterior walls.

 

[teejk]

Thanks all! All of this is very helpful. Our three new interior walls are built, and I went the Big Box to get a 250' of 12-2 wire so I can rough in the electric. I noticed they were having a sale on fiberglass insulation, and I was thinking of putting R-13 or R15 in the three interior walls. My studs are rough cut hemlock at an honest 4". I plan to panel the aisle side of the barn with reclaimed barn wood to maintain the character. Thoughts? We have not yet decided how to cover the shop side of the wall or how to insulate the exterior walls.
View attachment 486403

The old rule was R19 is used on 5.5" material (2x6), R11 on typical 3.5" (2x4). I guess the insulation guys have figured out how to increase the R value on each (R21/R13) With a true 2x4 I guess R15 might work. You haven't mentioned your heating supply yet.

 

[Reload5]

@Jack707 - Please catch me up on spray foam "growing outside the barn" as I have plans to spray the entire inside of my metal barn when it is complete...

 

[Rustyiron]

We want to insulate now from the inside, and we have access to some reclaimed 4x8 sheets of 1-inch thick rigid yellow polyiso insulation. We plan to panel the interior of the shop with boards.

Thoughts on the installation of the polyiso or other insulation? The interior two walls will also need to be insulated, but those are new walls built between the beams.

Thanks in advance!

That rigid polly-iso is equal to spray foam, (per inch) good stuff. Cut & fit tightly and use "can foam" to seal the edges & any joints. I used 2 layers of 1.5" and had enough room left for 3.5" of f/g. I would use 2 layers at the exteror walls to put your dew point in the insulation to avoid moisture issues.
Lucky your in Maine, you can check out "hot & cold" radio with host Tom Gocze on the radio 101.3 Augusta on Sat. mornings starting at 8:00. All sorts of great building info, and you can call in with your questions.

 

[jack707]

@Jack707 - Please catch me up on spray foam "growing outside the barn" as I have plans to spray the entire inside of my metal barn when it is complete...

I had my house outside wall sprayed and anyone who comes over can see the foam that came thru. Now as far a my pole barn goes nothing came out.

 

[jadefox]

That rigid polly-iso is equal to spray foam, (per inch) good stuff. Cut & fit tightly and use "can foam" to seal the edges & any joints. I used 2 layers of 1.5" and had enough room left for 3.5" of f/g. I would use 2 layers at the exteror walls to put your dew point in the insulation to avoid moisture issues.
Lucky your in Maine, you can check out "hot & cold" radio with host Tom Gocze on the radio 101.3 Augusta on Sat. mornings starting at 8:00. All sorts of great building info, and you can call in with your questions.

So 3" of Pollyiso with R-13 for the exterior walls?

 

[AGRIMAN]

Foam will find any crack or gap and depending on the size determines if you have a "bulge" of foam on the outside or over spray everywhere. In most cases it can be cleaned up, but it's best to avoid it if possible.

We try and identity problem areas and seal them ahead of time and if we suspect problems we keep a check on things.