New to me DK45SE

[k0ua]

Here are the pictures as promised. My son has already driven it more than I have.

Looks great Dave. You might want to weld you two 5/16 chain hooks on to that bucket. Mighty useful for lots of activities. There are two great spots already reinforced on the bucket for this purpose. Just clean off the paint and stick them on. I used 7018 at 125 amps DC

 

[daveborg98]

I have a Miller MIG unit and I think that would be a great usage for it.

Now to just find one that has decent metal. Any suggestions?

 

[k0ua]

I have a Miller MIG unit and I think that would be a great usage for it.

Now to just find one that has decent metal. Any suggestions?

I found mine at a farm supply store. 5/16 forged, made just for weld on. About $5 each.

 

[k0ua]

Tulsa chain has them for $3.21

G7 Weld on Grab Hook - From Tulsa Chain, Inc.

 

[daveborg98]

Awesome. That is service for you.

 

[k0ua]

Awesome. That is service for you.

No problem, I like to help people.

 

[ksbrdmkr]

For torque on most blots/nuts that are not critical for warping I have been using the S-K break over bar since the middle 50s and after 60 years have a pretty good feel for the amount of torque for the size of bolt. Before welding hooks on the bucket I welded a angle iron on the entire length of the bucket.

 

[oercheron]

I am quite new here and am purchasing my first tractor.
Anyways, since this is my first tractor I am wanting to know what to look at before putting it to use.

Hope you are having some fun with this tractor!

Mine is the same, a 2011 version with 800 - 900 hours of hard use. Hardly any problems, and a very good dealer (Timberstar in Vernon BC)

Things to look out for as a new owner:
- I have had to replace the ignition switch twice, both times under warranty. This is a known problem with this machine, and apparently fixed now
- If you are using the FEL much at all, definitely get some counterweight. On mine, there is very little weight on the rear tires with a full bucket and no counterweight. Kioti owners manual recommends 1056 lbs hanging from the 3 point hitch.

You can see mine doing some stuff on my youtube channel at muleskinnerjack
- YouTube