Help! Looking for tractor.

[Wagtail]

Here's some info on your 730: TractorData.com John Deere 73 tractor information

The site says that your 730 would mount a JD 45 FEL if you could find one and your tractor can certainly handle a round bale... as long as it isn't frozen/soggy.

I specifically bought my 4105 (with FEL) to handle round bales. I do a wee bit of pyramid stacking at home but can end-stack 2 high if required.

 

[TomSeller]

1948. The old barn burned so they had to build a new one. They had mules back then and a Case SC. My 730 wasn't even produced for another 10 years.

Very nice. I think that ancient tool in the third picture is what they called a hammer. It was designed to hit and drive in a nail without air or electric power. Amazing.

I have no idea what those people are doing to that truss arch in the second to the last picture.

 

[DerekA09]

Here's some info on your 730: TractorData.com John Deere 73 tractor information

The site says that your 730 would mount a JD 45 FEL if you could find one and your tractor can certainly handle a round bale... as long as it isn't frozen/soggy.

I specifically bought my 4105 (with FEL) to handle round bales. I do a wee bit of pyramid stacking at home but can end-stack 2 high if required.

I'm wanting something smaller. (Fit into the barn as you can see my tractor is quite a bit taller than that opening) I was just hoping that if I got a second smaller tractor that it could lift a bale with the 3 point so I could retire the old girl for the winter. I have a 3 point scissor attachment for the bale spear to lift bales onto a trailer. That's not my issue. I just figure if I bought a second tractor to fit into smaller places that with the hydraulic power of newer equipment that it would be able to move a bale off the 3 point in the winter to feed so I wouldn't have to use the 730. My dad had a John Deere 430 which worked perfect for this. I was just thinking if I got something newer about the size of a 430 that with advancements in hydraulic power of newer vs a 60 year old tractor that it could lift a round bale.

 

[DerekA09]

Very nice. I think that ancient tool in the third picture is what they called a hammer. It was designed to hit and drive in a nail without air or electric power. Amazing.

I have no idea what those people are doing to that truss arch in the second to the last picture.

Haha yeah that was a few years ago. Lol the picture looks like work lol back before you paid people to do things and just did them yourself. The one with the hammer is my great grandpa. My grandpa & great grandpa was on the left of that pic of them lifting the truss.

 

[beenthere]

Very nice. I think that ancient tool in the third picture is what they called a hammer. It was designed to hit and drive in a nail without air or electric power. Amazing.

I have no idea what those people are doing to that truss arch in the second to the last picture.

Tom.. those people are raising that "arch" into place, likely after nailing it together on the hay-mow floor as shown. That date was even pre-electric "skil" saw at that time. We had a barn nearly a duplicate of the one shown. Had one cow, one pig (with a litter of 7), and one beef calf. The place was in Waterloo, IA where that 730 was "born".

 

[jenkinsph]

View attachment 494367 View attachment 494368 View attachment 494370 View attachment 494371 View attachment 494372

1948. The old barn burned so they had to build a new one. They had mules back then and a Case SC. My 730 wasn't even produced for another 10 years.

I liked the Case SC, that was our first tractor when we moved out of the city. I would think having one in 1948 was "uptown". Ours had the eagle claw hitch, the rear 540 pto that was much higher than later tractors and had rear hydraulic double acting remove valve. The hydraulics used type A transmission fluid and were good enough to run a hydraulic winch loading pulpwood.

 

[motownbrowne]

If you're forgoing a loader I think you can definitely buy a machine that will move round bales on the three point for pretty cheap. Of course, unless you already have a nice loader, I'd strongly recommend getting one.

Another thought, why not a skid steer? Just about every farm around here has one for moving bales and haylage.

 

[TitanSkidsteer]

If you're forgoing a loader I think you can definitely buy a machine that will move round bales on the three point for pretty cheap. Of course, unless you already have a nice loader, I'd strongly recommend getting one.

Another thought, why not a skid steer? Just about every farm around here has one for moving bales and haylage.

I completely agree. You can find a lot of attachments for skid steers at a much lower cost, and they can handle anything an FEL can. Seems you can find a slightly older model at a very affordable price and would more than likely fit your height requirements.