Everlast Welders - Welders and Plasma Cutters by Everlast

[mitchash]

Hi, Im interested in the Everlast i Mig 200. I dont weld a lot but do work on vintage dirt bikes and my own tractors and equipment. I have a 110 Clarke 130 amp mig welder, old Wards 225 amp buzz box stick welder and a Lincoln G9000 welder/generator. I mostly use the little MiG welder and would like to upgrade it. I might sell the Welde/Generator since it sits most of the time and now needs the carb cleaned. Would the I Mig 200 be a good replacement/upgrade welder?

 

[mitchash]

Hi, Im interested in the Everlast i Mig 200. I dont weld a lot but do work on vintage dirt bikes and my own tractors and equipment. I have a 110 Clarke 130 amp mig welder, old Wards 225 amp buzz box stick welder and a Lincoln G9000 welder/generator. I mostly use the little MiG welder and would like to upgrade it. I might sell the Welde/Generator since it sits most of the time and now needs the carb cleaned. Would the I Mig 200 be a good replacement/upgrade welder?

Any sales on them now?

 

[JimRB]

When I bought my Everlast I just called Mark to get the best deal. He also asked a few basic questions to confirm that the unit I picked would be a good fit.

 

[Mark @ Everlast]

Yes. There is one right now.

 

[mitchash]

How long is the sale going on for? Any details?

 

[fried1765]

Any sales on them now?

Watch the prices on Jet.com, and Newegg.com, and try to be patient.

 

[Fallon]

Watch the prices on Jet.com, and Newegg.com, and try to be patient.

I'd highly disagree on that. I got a better than advertised deal a year or 2 ago calling Everlast directly. If you go direct & cut out the extra middle men & their overhead it's usually a better deal.

 

[fried1765]

I'd highly disagree on that. I got a better than advertised deal a year or 2 ago calling Everlast directly. If you go direct & cut out the extra middle men & their overhead it's usually a better deal.

So.... you "highly disagree" with watching prices on other sites?
I did not say BUY!
I suggested watching.
You "highly disagree" with looking for the best deal?
I did get a great price on my I-MIG 140e directly from Everlast, but Newegg had exactly the same price at that time.

 

[Fallon]

So.... you "highly disagree" with watching prices on other sites?
I did not say BUY!
I suggested watching.
You "highly disagree" with looking for the best deal?
I did get a great price on my I-MIG 140e directly from Everlast, but Newegg had exactly the same price at that time.

To some degree, yes, price watching elsewhere may not get you anything over going directly to the source.

3rd party resellers run sales that may or may not be related to the OEMs pricing.

I looked around a fair before getting my plasma cutter. But calling the guys at Everlast directly beat the best price I could find after having looked for a while

 

[woodlandfarms]

There has been a few recorded cases of stunningly great deals (like 75% off) on Amazon and JET for Everlast, but if you are in the need it sooner than waiting for the deal of the century give Mark a call. PM him, altough he is dealing with a personal issue at the moment, and he will get back to you with his suggestions and usually a pretty killer price.