Good morning!!!!

   / Good morning!!!! #67,361  
My pin came part way out. The bolt that held in in was missing. Think I broke the bolt off on a stump then the pin slid. Guess a fellow got keep an eye on this. This happened after about 20 hours of use. Man they gotta be able to come up with something better than that.
I couldnt find the post, but it made me check mine.
 
   / Good morning!!!! #67,362  
0104181511.jpgheres where the bolt goes, hole still lined up.
 
   / Good morning!!!! #67,364  
5F, windchill -8 ... they're saying the overnight low will be -1F ... but the high tomorrow will only be 6F ... :eek:

Got the hole cut in the wall for the door into the closet. Of course, I did manage to catch the wiring with the Sawzall ... :rolleyes:

Fortunately, it wasn't the feed but for a single wall outlet. There's a suspended ceiling on the wall that that outlet is on and the top of the framing may be open so I should be able to so I should be able to fish a wire down to the outlet from above.

Also got the closet where the utility tub will be going all cleaned out.

Tomorrow I'll frame it in and hang the door.

In other news: Petco started a Dollar-a-Gallon tank sale back on the day after Christmas ... we live in very dangerous times ... :laughing:
 
   / Good morning!!!! #67,365  
Doctor called me tonight, says he talked to other doctors, who recommend letting things heal another month, dont mess with it, and see how things are then. No more surgeries for the time being, subject to change in a month.
 
   / Good morning!!!! #67,366  
Doctor called me tonight, says he talked to other doctors, who recommend letting things heal another month, dont mess with it, and see how things are then. No more surgeries for the time being, subject to change in a month.

Good news!
 
   / Good morning!!!! #67,367  
Doctor called me tonight, says he talked to other doctors, who recommend letting things heal another month, dont mess with it, and see how things are then. No more surgeries for the time being, subject to change in a month.

Gotta love a Dr smart enough to get opinion of others.
 
   / Good morning!!!! #67,368  
Great news Buckeyefarmer
 
   / Good morning!!!! #67,369  
Good news!
I like the plan, don't think it can hurt to wait longer. The 2 procedures he did to get xrays and check it might have actually made it a little worse, but it was the only way to check.
 
   / Good morning!!!! #67,370  
Good evening all. 24F this morning, partly cloudy, light east wind. Wind stayed down, sky cleared and high temp was 46F. Let the WBS coals burn out to clean the ash, had to go to dentist today, $1500 work needs to be done, spent 2K last year :(. Got home from errands and lunch went for ride, cleaned stove and fire the stove up.
New weather station and water over the dam 01/01 (slightly frozen)
 

Attachments

  • IMG_20180101_104514986_HDR.jpg
    IMG_20180101_104514986_HDR.jpg
    1.7 MB · Views: 121
  • IMG_20180101_110351462.jpg
    IMG_20180101_110351462.jpg
    1.3 MB · Views: 122
Last edited:

Tractor & Equipment Auctions

2022 Club Car Tempo Golf Cart (A48082)
2022 Club Car...
Hotpoint DBL1550BALAD Dryer (A50860)
Hotpoint...
2013 HINO 388 (A50854)
2013 HINO 388 (A50854)
2013 Ford F-350 4WD Pickup Truck (A50860)
2013 Ford F-350...
2020 Case IH 8250 4WD Combine (A50657)
2020 Case IH 8250...
3HP Electric Fans (A50854)
3HP Electric Fans...
 
Top