If there was anything that was made to be abused, it is a grapple. Go read a bunch of the grapple threads in the "attachments" section...
Simple Grapple Design done!
- Thread starter polemidis
- Start date
- Views: 7119
If there was anything that was made to be abused, it is a grapple. Go read a bunch of the grapple threads in the "attachments" section...
Ok hear you!
I will do it, cheap insurance I designed this grapple for a)pick up limbs and brush as I am logging, b) stack green hardwood logs to a pile, c) load the firewood to the trailer. (will be possible if I add extra bolt-on narrow tines), d) maybe some rocks in that descending order. I never thought to use it as a root grapple but you are right for such a use a lot more support would be needed. Even though I am sceptical if that design will be able to stand up to that abuse. For a root grapple I believe the tines should not extend that much, and should be one piece with the vertical members.
So I finished the BOM you can see them here
Whoever wants the 3dmodel can download it from here
BUT..... the grapple will weight 448lbs without the cylinders. Isn't that tooooo heavy, that will restrict me from lifting 16ft green oak logs? max diameter around 16in. My tractor has lifting capacity 1800lbs at the pivot
I am so close to start fabricating and I have all kinds of second thoughts, like
a) The square tubing (the 2 brown ones) are 3" x 1/8" . Isn't too thin?
b) Mostly everything is designed out of 3/8" , should I downgrade to 5/16"? it will save my around 50lbs
c) If not what about downgrade to 5/16" and choose higher grade steel?
d) Or maybe 63" its just to wide of a grapple for me?
e) Anywhere else I could save weight? MAybe do just the lids from thinner material? But that will just make the steel order more complicated and I will have lots of leftovers.
Whoever wants the 3dmodel can download it from here
BUT..... the grapple will weight 448lbs without the cylinders. Isn't that tooooo heavy, that will restrict me from lifting 16ft green oak logs? max diameter around 16in. My tractor has lifting capacity 1800lbs at the pivot
I am so close to start fabricating and I have all kinds of second thoughts, like
a) The square tubing (the 2 brown ones) are 3" x 1/8" . Isn't too thin?
b) Mostly everything is designed out of 3/8" , should I downgrade to 5/16"? it will save my around 50lbs
c) If not what about downgrade to 5/16" and choose higher grade steel?
d) Or maybe 63" its just to wide of a grapple for me?
e) Anywhere else I could save weight? MAybe do just the lids from thinner material? But that will just make the steel order more complicated and I will have lots of leftovers.
This is why a lot of people simply buy one...someone else has already made about six of these and learned all the lessons. Like using a higher strength steel which is more expensive, so that the end product can be lighter. When we start out thinking "it is just steel, how hard can it be...?" we very often do not see the decades of learning that went into getting something into its final form.
The smaller the machine, the more the weight counts. Believe it or not, 70 lbs made a big difference on one of my machines.
To me, the most surprising thing is how the commercial guys like EA can make these for what they sell them for and still have enough cash flow at the end of the day to keep the lights on and the staff in cheese whiz and coffee.
The smaller the machine, the more the weight counts. Believe it or not, 70 lbs made a big difference on one of my machines.
To me, the most surprising thing is how the commercial guys like EA can make these for what they sell them for and still have enough cash flow at the end of the day to keep the lights on and the staff in cheese whiz and coffee.
They sell them about $2000. Hydraulics cost $200, the higher grade steel about $500?? The freight $150, I think there is enough margin to cover the labor costs, the laser cost and make a normal profit especiallly when they get over the prototyping stage.
But the impressive thing is that today -in contrast with a few years ago-, we have professional and free CAD programs to design it. And also run the Finite Element Analysis. It is that I -yet- do not trust myself. My experience with steel is zero, I have welded less than 2-3 hours total in my life, and i first used a tractor 4 months ago!
And here is the magic of the open source. I have spent about 200hours CADing, and you guys have spent 4hours helping me. I have the design open to anyone. When I build mine, whatever feedback with be posted on my webpage. The next guy who will build it will have all that for free. And every "next" guy will have a larget pool of feedback. Can we design all the major implements that way?? I think we can. I am developing the firewood processor, the cost will be about $6000 compared to $26000 of the commercial product, and a well rig for shallow (60-80ft) wells. I believe that the FreeCAD, and Open Source in general will have a huge impact on the hardware we are using.
But the impressive thing is that today -in contrast with a few years ago-, we have professional and free CAD programs to design it. And also run the Finite Element Analysis. It is that I -yet- do not trust myself. My experience with steel is zero, I have welded less than 2-3 hours total in my life, and i first used a tractor 4 months ago!
And here is the magic of the open source. I have spent about 200hours CADing, and you guys have spent 4hours helping me. I have the design open to anyone. When I build mine, whatever feedback with be posted on my webpage. The next guy who will build it will have all that for free. And every "next" guy will have a larget pool of feedback. Can we design all the major implements that way?? I think we can. I am developing the firewood processor, the cost will be about $6000 compared to $26000 of the commercial product, and a well rig for shallow (60-80ft) wells. I believe that the FreeCAD, and Open Source in general will have a huge impact on the hardware we are using.
I just downloaded it and opened it just to check it. It looks fine. What exactly is the problem? You can use Freecad v0.16 to open it, but it is made with Freecad v0.17 so ideally use that daily version. If you use solidworkds or some other CAD let me know so I can export it to .step format. And if you want to edit it the individual parts I will upload later these too. I will put some instructions on my wiki page.