ronjhall
Super Star Member
Made it back from doctor. Other than couple of test Friday and Monday. I should be good to go. Oh and a pill a day.
Good morning!!!!
- Thread starter 300UGUY
- Start date
- Views: 17013426
ronjhall
Super Star Member
Find your welder in the garage and fix it. People are going to riot because the project stopped.
buckeyefarmer
Epic Contributor
Must be a union job.
jbrumberg
Elite Member
- Joined
- Jan 22, 2006
- Messages
- 4,903
- Location
- Cummington, MA
- Tractor
- New Holland TC29DA, John Deere D130
Ron- It reads like good news. Good luck Friday and Monday.
Don- The best laid plans...... Things always seem to fail when there is an audience and a "peanut/popcorn" gallery watching.
opcorn:opcorn: Good luck with the rig "adjustments."
It made it to 34F here today. More driveway challenges are developing.
Don- The best laid plans...... Things always seem to fail when there is an audience and a "peanut/popcorn" gallery watching.
opcorn:opcorn: Good luck with the rig "adjustments."It made it to 34F here today. More driveway challenges are developing.
buckeyefarmer
Epic Contributor
Back from Dr, xray looked good. Now it's wait and see time again.
daugen
Epic Contributor
Buckeye and Ron, good news i hope and think.
got the chain harrow back on the original shipping pallet, a very odd skinny long pallet, not normal at all, and
was smarter this time and spent fifteen minutes adding another support to the pallet where the forks just missed a second
rung. Visions of great cracking noises...so I got it beefed up and then took it out to the field and loaded the chain harrow.
Tried to pull it by hand, what a joke, only threw out my back. I had kept the forks on so they came in very handy.
I was very pleased to finally read the tag on the chain drag harrow that I special ordered at Tractor Supply. My expectations were far exceeded when I saw the
size of the chains the first time. Well, it seems I have a very fine British harrow! Built in Halesowen outside of Birmingham and I even found the builder's small factory
on Google Maps. Seems I must have the Bentley of drag harrows...:thumbsup:
Attaboy TSC purchasing.
spent some time with both neighbors,my one neighbor and I agreeing that our other common neighbor was getting more pitiful all the time.
And my fireman neighbor is a distant relative of the Drunken Farmer and just wishes the guy would disappear. The farmer extolled today about something that would
make Roy smile, as he said the big farm that used to cover this whole area was called the plantation. Not that long ago...
The farmer said I could have all the land I wanted, which he had said before and I think I made some progress on his getting his prior tenant farmer back.
Overall a good afternoon in mid sixties sunshine.
Changed the fuel filter in the Gravely, sharpened the blades on the Cub Cadet LX2; fancy fab deck on this mower but the world's cheesiest blades. They must weigh a third of
my other blades. And the end was slightly worn off. I guess lightweight blades keep lightweight hubs running longer. MTD not at its finest. I did see its finest today at the dealer where they had the new professional grade Cub Cadet zero turns, with steering wheels. Super heavy duty large frame mower. I wondered quietly why they wanted $12k CC zero turn when they also sold Kubota zero turns. Well, Kubota doesn't offer a steering wheel... shoe for every foot I guess.
No Super A today, and they even admitted to a drip...whatever that is they intend to fix it and deliver tomorrow. I said not to rush, going to be pouring rain and the fields are so wet I can't use the thing anyway. Plus it's going to be really cold this weekend so not like I'll be riding around on that thing...once i figure out how to start it...
got the chain harrow back on the original shipping pallet, a very odd skinny long pallet, not normal at all, and
was smarter this time and spent fifteen minutes adding another support to the pallet where the forks just missed a second
rung. Visions of great cracking noises...so I got it beefed up and then took it out to the field and loaded the chain harrow.
Tried to pull it by hand, what a joke, only threw out my back. I had kept the forks on so they came in very handy.
I was very pleased to finally read the tag on the chain drag harrow that I special ordered at Tractor Supply. My expectations were far exceeded when I saw the
size of the chains the first time. Well, it seems I have a very fine British harrow! Built in Halesowen outside of Birmingham and I even found the builder's small factory
on Google Maps. Seems I must have the Bentley of drag harrows...:thumbsup:
Attaboy TSC purchasing.
spent some time with both neighbors,my one neighbor and I agreeing that our other common neighbor was getting more pitiful all the time.
And my fireman neighbor is a distant relative of the Drunken Farmer and just wishes the guy would disappear. The farmer extolled today about something that would
make Roy smile, as he said the big farm that used to cover this whole area was called the plantation. Not that long ago...
The farmer said I could have all the land I wanted, which he had said before and I think I made some progress on his getting his prior tenant farmer back.
Overall a good afternoon in mid sixties sunshine.
Changed the fuel filter in the Gravely, sharpened the blades on the Cub Cadet LX2; fancy fab deck on this mower but the world's cheesiest blades. They must weigh a third of
my other blades. And the end was slightly worn off. I guess lightweight blades keep lightweight hubs running longer. MTD not at its finest. I did see its finest today at the dealer where they had the new professional grade Cub Cadet zero turns, with steering wheels. Super heavy duty large frame mower. I wondered quietly why they wanted $12k CC zero turn when they also sold Kubota zero turns. Well, Kubota doesn't offer a steering wheel... shoe for every foot I guess.
No Super A today, and they even admitted to a drip...whatever that is they intend to fix it and deliver tomorrow. I said not to rush, going to be pouring rain and the fields are so wet I can't use the thing anyway. Plus it's going to be really cold this weekend so not like I'll be riding around on that thing...once i figure out how to start it...
Attachments
![IMG_0510[1].JPG](/forums/data/attachments/483/483616-9939fa65fc29b269e4507b324b47abe4.jpg)
![IMG_0513[1].JPG](/forums/data/attachments/483/483624-d0e3eef4a553790ff1da7534fbea7271.jpg)
txdon
Super Star Member
Two hydraulic hose leaking two trips to town
Bucket change out
24 grease zeros greased
Ready to start the countdown.
Bucket change out
24 grease zeros greased
Ready to start the countdown.
DABSGT
Veteran Member
Bird when you see the PCD have him also do an EKG, better safe than sorry. Area of the pain and comes and goes with activity would make me suspicious.
If it gets worse don't brush it off.
Thanks
txdon
Super Star Member
5:00 quitting time
txdon
Super Star Member
Overtime approved
Finally ground breaking
Finally ground breaking