This welder is dual voltage 110/220. Does this mean it can be plugged into a regular 110 outlet? I have someone coming to set up 220 in about a week but am anxious to try it out and was wandering if I could just plug it into a regular 110 outlet.
Everlast Powerarc 200ST
- Thread starter Tractorrr
- Start date
- Views: 5740
dragoneggs
Super Star Member
- Joined
- Jun 9, 2013
- Messages
- 13,627
- Location
- Seabeck, Washington
- Tractor
- Kubota BX-25D, Kubota Z122RKW-42
murse72
Bronze Member
- Joined
- Oct 4, 2016
- Messages
- 64
- Location
- west monroe, Louisiana
- Tractor
- Kubota M7060, Kubota L3010, badboy lightning 31hp kaw 60inch deck,
i tried ordering one off of amazon, shipping date kept getting pushed back. Then stated shipped with a tracking number but the number did not work, then got an email staying it still had not been shipped. I ordered it on April 19 and on June 1 they cancelled my order. I guess they have having issues getting that welder. Hope you have better luck than me on getting one.
RNeumann
Elite Member
Most welders on a 120v 20amp breaker won’t weld very hot. To consistently avoid piping the breaker I’d say you can expect maybe 30-40% of max output.
IMO the 120v “feature” is gimmicky- it seems to cause more frustration to new welders than bail folks out. Plan to get a 240v plug or run a 10g cord with new ends off your dryer plug.
IMO the 120v “feature” is gimmicky- it seems to cause more frustration to new welders than bail folks out. Plan to get a 240v plug or run a 10g cord with new ends off your dryer plug.
fried1765
Super Star Member
- Joined
- Jan 6, 2015
- Messages
- 10,089
- Tractor
- Kubota L48 TLB, Ford 1920 FEL, 8N Ford, Gravely 12 HP "Professional", 48" SCAG Liberty
It is possible to buy a 120V 30amp breaker, perhaps that would work better.
Mark @ Everlast
Advertiser
There is a new 210ST on the way. Well actually there a few new model Powerarcs on the way. I could have gotten one for you, but with the low amount we have left visible on the inventory sheet, I imagine that we are now down to 0. Inventory update is running a little behind because we have moved to a larger facility and the updates got behind. I'm showing 6 left 3 days ago. Probably could have gotten a better price. Next model available should be the 210STi.
Ritothebull
Gold Member
- Joined
- May 5, 2018
- Messages
- 348
- Location
- Brooksville, Florida
- Tractor
- Massey 461 Massey 165 . KTM SDGT
Any idea when the 210sti will be available?
Thanks
Thanks
RNeumann
Elite Member
Yes that would help. But by code you would also need the correct sized wire too- I never seen a 120v circuit that was designed for 20a with oversized (10g copper) in it. That doesn’t mean folks haven’t done it- it’s just not code.
I did run a 30a 120v circuit for a 120v only welder. But if you are going through the trouble to add a circuit for a 120/240 welder I’d just add the 240.
Mark @ Everlast
Advertiser
No, there is no violation to have a 30 amp breaker on a 15/20 amp receptacle, if it is inrush current (for a duty cycle limited welder). The conductor size is based off the I1eff current, not the I1max
