Welding Jacket

   / Welding Jacket #21  
My dad worked as a welder for Gardner Denver before I was born until the early 70's. He always told a story of having a shirt with a pocket underneath his welding jacket. He kept getting these warm sensations on his chest and was starting to get concerned that he was having some health issue. He finally took a break and removed his jacket to find his pocket had completely smoldered away. He'll be 89 in about a month.
 
Last edited:
   / Welding Jacket #22  
Welding wouldn't be much fun if you didn't set you self on fire every now and then.:fiery: Brakes the monotony.:cool2::drink:
 
   / Welding Jacket #23  
In a pinch you can just wet down a long sleeve shirt for small jobs it also helps if you are welding laying under a vehicle or whatever your working on take a small blanket and soak it in water to cover yourself!
 
   / Welding Jacket #24  
Welding wouldn't be much fun if you didn't set you self on fire every now and then.:fiery: Brakes the monotony.:cool2::drink:

I literally had a flannel shirt burst into flames on me one day. Pretty exciting.
 
   / Welding Jacket
  • Thread Starter
#25  
In a pinch you can just wet down a long sleeve shirt for small jobs it also helps if you are welding laying under a vehicle or whatever your working on take a small blanket and soak it in water to cover yourself!

I can give you a written and notarized lifetime guarantee that your two scenario's will never happen....
That is what checkbooks are for.
Sometimes you have to make time for fishing. :fishing:
 
   / Welding Jacket #26  
Lol I find it easier to get under a piece of equipment and weld than finding a notary that's like at least 1hr away lol
 
   / Welding Jacket #27  
I’ve done enough crawling under equipment in my life. My attitude these days is if it doesn’t fit on the bench, isn’t waist height, or can’t be turned upside down, it really doesn’t need welding or fixing.
 
   / Welding Jacket #28  
I致e done enough crawling under equipment in my life. My attitude these days is if it doesn稚 fit on the bench, isn稚 waist height, or can稚 be turned upside down, it really doesn稚 need welding or fixing.

my oldest boy is 10 in 3 to 5 years i should be able to stop crawling under or climbing onto things as much lol just like once he hit 3 years old i no longer bend over to pick up dropped tools or parts lol
 
   / Welding Jacket #29  
Big Barn we call that only working in the strike zone.:baseball::D:drink:
 
   / Welding Jacket
  • Thread Starter
#30  
Wow, gotta love that amazon prime. Mrs.tiller signed up for a month of free amazon prime last week so I ordered the jacket after lunch Saturday and the mailman delivered it to my front door at 10:00 this morning. That's about 45 hours, and over a holiday weekend.

It looks like Magid clothing sizes are pretty accurate. The jacket is plenty big over a t-shirt. I probably could have ordered a 3x and been just as happy.

41YVcs9Ok%2BL._SX342_.jpg
 

Tractor & Equipment Auctions

2014 TOYOTA 8FGCU25 FORKLIFT (A51222)
2014 TOYOTA...
1999 MACK CH613 WATER TRUCK (A50854)
1999 MACK CH613...
TTS5-10680 Rubber Tire Asphalt Roller (A49461)
TTS5-10680 Rubber...
2008 Ford F-250 4x4 Service Truck with Liftgate (A50323)
2008 Ford F-250...
WHITE CI-7 DRAW WORKS POWERED BY TWIN (60 SERIES) DETROIT 14.0L ENGINES (A50854)
WHITE CI-7 DRAW...
Yale 50LX Cushion Tire Forklift (A49461)
Yale 50LX Cushion...
 
Top