duffer
Platinum Member
If you haven't done so already, I'd spend an hour actually doing "test runs" of hooking up PTO implements, detaching the FEL bucket, and any other normal tasks you would do with your setup. For instance...when hooking up a PTO implement from the cab, how difficult is it? Does the spline on the tractor rotate freely when dis-engaged so you can line up the PTO shaft on the implement easily. Or do you have to rotate the implement drive shaft in order to line up the spline. The bigger the implement, the harder to rotate the drive shaft.
How big is the FEL bucket? Can you get a larger one, so that you can carry more "cube" for lighter materials? Is the bucket a quick attach/skid steer setup?
Think about how all the different ways you will use it, and then go thru the motions on the dealer lot, before you open your wallet. Not saying you won't be happy with your choice, just try to eliminate any disappointments up front.
Good luck, and let us know how it turns out!
How big is the FEL bucket? Can you get a larger one, so that you can carry more "cube" for lighter materials? Is the bucket a quick attach/skid steer setup?
Think about how all the different ways you will use it, and then go thru the motions on the dealer lot, before you open your wallet. Not saying you won't be happy with your choice, just try to eliminate any disappointments up front.
Good luck, and let us know how it turns out!