Egon
Epic Contributor
Most backhoe work has the tires off of the ground so the machine can be levelled, reduce forces on the drivetrain and anchor the backhoe in place.
Backhoe lifting tractor ... digging force?
- Thread starter boostmg
- Start date
- Views: 6439
Gary Fowler
Super Star Member
- Joined
- Jun 23, 2008
- Messages
- 11,917
- Location
- Bismarck Arkansas
- Tractor
- 2009 Kubota RTV 900, 2009 Kubota B26 TLB & 2010 model LS P7010
I have seen construction operators (? the operator status) jack the backhoe up as high as it would go with all front and back wheels more than a foot off the ground. I dont see any need for that unless you are trying to get clearance to get over a wall or something.
I jack my TLB up enough to level it and just enough to take a bit of weight off the tires and settle the stabilizers in the dirt on the high side. Anything more is just wasted hydraulic power and time. Sometimes this requires the FEL bucket to be in full dump mode in order to raise the front up enough for the TLB to be level.
Opti-Mist
Platinum Member
Having been a trainer back in the day, the recommended practice was to transfer the weight of the Tractor-Loader-Backhoe to the stabilizers (and the loader bucket which was flat on the ground) to create a stable operating platform, much as Gary described above. Jacking the backhoe all the way up also reduces digging depth by the amount the tires are off the ground.
Richard
Elite Member
- Joined
- Apr 6, 2000
- Messages
- 4,979
- Location
- Knoxville, TN
- Tractor
- International 1066 Full sized JCB Loader/Backhoe and a John Deere 430 to mow with
Not that this will add anything of importance.....but I do want to say that resting the front bucket on the ground substantially firms up the machine.
When I'm using mine for whatever purpose.... I can always tell when the front bucket isn't on the ground, the shake that will go through the machine is much higher. So I reach backwards, push lever until I feel it pressure down....and continue.
For me, it's almost like driving without a seat-belt on.... I feel (to use an odd word) naked and vulnerable. Put seat belt on and everything is right. With the bucket off the ground, it feels vulnerable.... push it down and all is right.
When I'm using mine for whatever purpose.... I can always tell when the front bucket isn't on the ground, the shake that will go through the machine is much higher. So I reach backwards, push lever until I feel it pressure down....and continue.
For me, it's almost like driving without a seat-belt on.... I feel (to use an odd word) naked and vulnerable. Put seat belt on and everything is right. With the bucket off the ground, it feels vulnerable.... push it down and all is right.
