TODAYS SEAT TIME

   / TODAYS SEAT TIME #9,681  
I'm surprised you travel with the bucket that high in the air...

Its not something I normally do but I need to have the bucket raised to make the turns in and out of the gate and the horses kept getting in front of me so I don't need to be pushing them out of the way with the bucket either. The loads were also a lot lighter than they looked so I wasn't concerned about tipping any which way.
 
   / TODAYS SEAT TIME #9,682  
I will not operate my tractor with the bucket up, even if it's empty!

I cringe every time I see someone driving around doing so!

SR
 
   / TODAYS SEAT TIME #9,683  
I will not operate my tractor with the bucket up, even if it's empty!

I cringe every time I see someone driving around doing so!

SR

I agree, mines about as close to skimming the ground as I can get it..
 
   / TODAYS SEAT TIME #9,684  
I mow hay with the bucket up for better visibility...guess I am not the best example to follow :p My bucket is also not quick attach so taking it on and off isn't always a time saving task. I'm also a "flatlander" so I've never been in/on the hills or I'm sure I would have a different way of doing things.I have at least been taught to drive with the bucket as low as possible at least when loaded but I can be a bit of a rebel (darn us youngsters) when I have a lot of work to do and a very small window of opportunity to get it done. The key thing for me is to be paying attention to the tractor and any attachments hooked up by listening, watching, feeling and anticipating the next move..

With all that said, now that I have a second tractor with a quick attach, the orange beast will get to sit on the side lines for hay making and I will be using the blue beast without any attachment on the front :)
 
   / TODAYS SEAT TIME #9,685  
I mow hay with the bucket up for better visibility...guess I am not the best example to follow :p My bucket is also not quick attach so taking it on and off isn't always a time saving task. I'm also a "flatlander" so I've never been in/on the hills or I'm sure I would have a different way of doing things.

Flatlander here, too...I mow with the bucket at what I like to call "stump height." That is, the bottom of the thing's only a couple of feet off the ground...I've got a Branson 2400H. Since I'm new to tractoring, I've read about people here running over all manner of things while brush-hogging, so since my new property is lightly wooded pasture with high grass, I figure running the Branson in this configuration is ideal since I'm likely (but not always) to strike something with the bucket first before the blades. Thankfully, the only thing I've hit with my Big Bee besides grass, weeds and little mesquite trees is dirt.

To keep this post on topic, I put in about an hour (or maybe a hair less) on Saturday doing the usual...cutting grass and hauling mesquite to the slash pile. BTW, I'd like to thank all you kind folk who recommended getting a tractor with an FEL! That thing is so dang handy, I can't imagine ever taking it off. At first, I was planning to go vintage with an neighbor's 8N, until I read here that unless you want to work on, instead of with, your tractor, you should probably steer clear of the old stuff. Like bazman said, I have a small window of opportunity to get this land ready for our new house next year.

BTW (and sorry for the longish post), I had a blast cutting "new" paths around the mesquites on my place last weekend...it made me thankful the salesman at Big Red's in Granbury (Texas) sold me a small tractor. Being able to maneuver that 2400H around, and under, trees is quite nice. I'm almost hesitant to get a canopy for the thing, but I know in less than a year, many of those trees will be gone and I'll be ready for some shade.

TXCOMT
 
   / TODAYS SEAT TIME #9,686  
I mow hay with the bucket up for better visibility...guess I am not the best example to follow :p My bucket is also not quick attach so taking it on and off isn't always a time saving task. I'm also a "flatlander" so I've never been in/on the hills or I'm sure I would have a different way of doing things.

Flatlander here, too...I mow with the bucket at what I like to call "stump height." That is, the bottom of the thing's only a couple of feet off the ground...I've got a Branson 2400H. Since I'm new to tractoring, I've read about people here running over all manner of things while brush-hogging, so since my new property is lightly wooded pasture with high grass, I figure running the Branson in this configuration is ideal since I'm likely (but not always) to strike something with the bucket first before the blades. Thankfully, the only thing I've hit with my Big Bee besides grass, weeds and little mesquite trees is dirt.

To keep this post on topic, I put in about an hour (or maybe a hair less) on Saturday doing the usual...cutting grass and hauling mesquite to the slash pile. BTW, I'd like to thank all you kind folk who recommended getting a tractor with an FEL! That thing is so dang handy, I can't imagine ever taking it off. At first, I was planning to go vintage with an neighbor's 8N, until I read here that unless you want to work on, instead of with, your tractor, you should probably steer clear of the old stuff. Like bazman said, I have a small window of opportunity to get this land ready for our new house next year.

BTW (and sorry for the longish post), I had a blast cutting "new" paths around the mesquites on my place last weekend...it made me thankful the salesman at Big Red's in Granbury (Texas) sold me a small tractor. Being able to maneuver that 2400H around, and under, trees is quite nice. I'm almost hesitant to get a canopy for the thing, but I know in less than a year, many of those trees will be gone and I'll be ready for some shade.

TXCOMT
 
   / TODAYS SEAT TIME #9,687  
The rain stopped and I was able to get some mowing done. Still have a lot more to do, but only had two hours before I needed to get back home, but got a bunch accomplished.

Resized_20190625_155024_001001.jpeg

Resized_20190625_154824001.jpeg

Resized_20190625_161403001.jpeg
 
   / TODAYS SEAT TIME #9,688  
My "seat time" today was, getting a Kubota diesel engine out of the barn and loading it on my trailer for delivery. An Amish guy wanted it WAAAAAY more than I did, and made me an offer I couldn't refuse!

Anyway, "away it goes"....

standard.jpg


Amish guy unloaded it with one of his tractors and was a happy camper...

SR
 
   / TODAYS SEAT TIME #9,690  
My "seat time" today was, getting a Kubota diesel engine out of the barn and loading it on my trailer for delivery. An Amish guy wanted it WAAAAAY more than I did, and made me an offer I couldn't refuse!

Anyway, "away it goes"....

standard.jpg


Amish guy unloaded it with one of his tractors and was a happy camper...

SR

Sounds like they traded in their 4 legged tractor..........
 
   / TODAYS SEAT TIME #9,691  
First time I seen a Farmtrac tractor, does look like a beast, front wheels are impressive.
 
   / TODAYS SEAT TIME #9,692  
First time I seen a Farmtrac tractor, does look like a beast, front wheels are impressive.

14.9/24's for fronts and 16.9/34 for tears. Only had it about 2 weeks now
 
   / TODAYS SEAT TIME #9,693  
I dug a hole for a septic tank. I’ve got quite a bit more digging to do in the next few days. IMG_6942.JPG
 
   / TODAYS SEAT TIME #9,694  
Yeah, had the Kubota as a helper today handing me lumber for the roof I was putting on one of my shooting range benches..

 
   / TODAYS SEAT TIME #9,695  
14.9/24's for fronts and 16.9/34 for tears. Only had it about 2 weeks now

Wow my rear tires are 11.2-24, and fronts are 16". Thats a nice tractor you have I wouldn't mine seeing more pictures of it when you get a chance.
 
   / TODAYS SEAT TIME #9,696  
Yeah, had the Kubota as a helper today handing me lumber for the roof I was putting on one of my shooting range benches..


Is that for skeet shooting or long range target practice?
 
   / TODAYS SEAT TIME #9,697  
Wow my rear tires are 11.2-24, and fronts are 16". Thats a nice tractor you have I wouldn't mine seeing more pictures of it when you get a chance.

I have some photos of it posted in some other thread. Check out the farmtrac thread under other tractors. I'll take more once I have a chance to start cutting some hay with it.
 
   / TODAYS SEAT TIME #9,698  
Is that for skeet shooting or long range target practice?

That one is a short range pistol range I've just set up.(the bench is not the correct tool for the job, but makes a good table for now.





What do you think of my little plates?? :laughing:



I have another range for 100 yard shooting down in the woods, and a range (1 target and a pair of gongs) out of my back yard at 250 yards.

WOW I see that photobucket now started putting their advertising over their pics! Need to find another way to store and post pics! What do you guys use??
 
Last edited:
   / TODAYS SEAT TIME #9,699  
32 loads of fine Georgia clay (FREE)KIMG0035.JPG over the last week. Spread it over a 1/4 acre area that was being wasted due to weeds, unevenness and large rocks. WAY BETTER now!
 
   / TODAYS SEAT TIME #9,700  
I spent 5 hours watching a mini chip rock while occasionally using my backhoe to clear chips. Then we set the tank. I’ll have to dig fill lines in a few days. I still haven’t completed the State course to be a licensed septic system installer. Mini excavators might dig better then backhoes but not when they’re half the size. That mini would have no chance beating my backhoe at much of anything.
 

Attachments

  • IMG_6947.JPG
    IMG_6947.JPG
    686.2 KB · Views: 175
  • IMG_6950.JPG
    IMG_6950.JPG
    710.9 KB · Views: 164
Last edited:

Tractor & Equipment Auctions

2013 Ford Explorer SUV (A59231)
2013 Ford Explorer...
SALTYS MANFUFACTURING 500BBL FRAC TANK (A58214)
SALTYS...
500BBL WHEELED FRAC TANK (A58214)
500BBL WHEELED...
2010 BOBCAT TOOLCAT 5610 UTILITY WORK MACHINE (A59823)
2010 BOBCAT...
500 BBL FRAC TANK (A58214)
500 BBL FRAC TANK...
UNUSED FUTURE FT-CL100C HYD CLAMP GRABBER (A52706)
UNUSED FUTURE...
 
Top