dragoneggs
Super Star Member
- Joined
- Jun 9, 2013
- Messages
- 13,627
- Location
- Seabeck, Washington
- Tractor
- Kubota BX-25D, Kubota Z122RKW-42
Not sure what this has to do with HF but Y'unta doesn't suck! :thumbsup:
Harbor Freight Tools that don't suck
- Thread starter Travelover
- Start date
- Views: 4111489
lostcreekranch
Super Member
- Joined
- Dec 14, 2012
- Messages
- 7,948
- Location
- Austin County, Texas
- Tractor
- NH TL-100A with Bush Hog 5045 FEL, WR Long 3rd function, LS XR4155HC w/FEL, WR Long 3rd Function.
HF Magnets to block air vent.
dragoneggs
Super Star Member
- Joined
- Jun 9, 2013
- Messages
- 13,627
- Location
- Seabeck, Washington
- Tractor
- Kubota BX-25D, Kubota Z122RKW-42
I got it... but did you listen to Y'unta?
lostcreekranch
Super Member
- Joined
- Dec 14, 2012
- Messages
- 7,948
- Location
- Austin County, Texas
- Tractor
- NH TL-100A with Bush Hog 5045 FEL, WR Long 3rd function, LS XR4155HC w/FEL, WR Long 3rd Function.
Yes, very good stuff. It was new to me.
BRMyers
Platinum Member
We bought 14-ft and 20-ft logging chains about three months ago from HF when they had a sale on chains and they let us use our 20% coupon. They have worked just fine pulling trees around, lifting equipment, and were a LOT cheaper than the other chains that were being sold at other stores.
hunt4570
Elite Member
- Joined
- Feb 10, 2015
- Messages
- 4,059
- Location
- South Carolina
- Tractor
- Grand L3540 ,724 loader, bucket, grapple and now forks also! And just for OP.. a pool!
Listened to several of them.. I was digging it!
This guy sits on a shelf in my living room, I call him chickenhead.. he's kinda funky too!
buckeyefarmer
Epic Contributor
HF is getting the band back together.Not sure what this has to do with HF but Y'unta doesn't suck!
stuckmotor
Super Member
- Joined
- Sep 23, 2009
- Messages
- 5,302
- Location
- Lower Up State S.C.
- Tractor
- AC WD 34 hp/3500 lbs MF 261 60 hp/5380 lbs
Do you think they'll go on the road?
mpsmith60
Silver Member
Give it time. They'll probably figure out a way to do that too!
mpsmith60
Silver Member
I recently bought the HF 20-ton shop press mainly to straighten bent things or bend straight things. Assembly was straight forward and the manual provide is clear and easy to follow. One person can assemble it but it would be easier with two. All the parts were there - nothing missing.
This thing weighs 190 lbs so it is best to have two people to load and unload the boxes from store to shop.
Having it has all ready saved me money because the first use was to straighten a bent backhoe thumb pin that is 1" round and about 9" long. It worked like a champ! Will be using it to straighten the teeth on a BXpanded trencher bucket soon. A great tool for any shop!
I made a video of the assembly and testing:
This thing weighs 190 lbs so it is best to have two people to load and unload the boxes from store to shop.
Having it has all ready saved me money because the first use was to straighten a bent backhoe thumb pin that is 1" round and about 9" long. It worked like a champ! Will be using it to straighten the teeth on a BXpanded trencher bucket soon. A great tool for any shop!
I made a video of the assembly and testing:
