Nacademus
Gold Member
That is a very good idea! I haven't had a reason to take mine off since I had it but this adds the option without of the fuss of lifting it and cutting the **** out of myself trying to reposition it back in place.
BXPanded contact?
- Thread starter wakeshredder
- Start date
- Views: 27839
That is a very good idea! I haven't had a reason to take mine off since I had it but this adds the option without of the fuss of lifting it and cutting the **** out of myself trying to reposition it back in place.
Imold
Platinum Member
- Joined
- Jul 23, 2019
- Messages
- 806
- Location
- West Central Mn.
- Tractor
- MF GC1705, Cub Cadet RZTL, Husqvarna Rider.
I am with you on that idea, I like it and I will copy it also because I have forks to use and a ball hitch to use on the bucket.
Yeah, I dropped it during the initial install, luckily I was
able to get out of the way, or I could have lost some toes!
Was gonna post a quick video clip showing how easy it is to flip it up, but I couldn't attach it...
I'm sure you all get the idea.
Best part is that when it's up, you can use the original edge again if needed
able to get out of the way, or I could have lost some toes!
Was gonna post a quick video clip showing how easy it is to flip it up, but I couldn't attach it...
I'm sure you all get the idea.
Best part is that when it's up, you can use the original edge again if needed
Scrambler82
Veteran Member
Started thinking, "Wondering if there is a Piranha Bar that will fit my BH" ?
Ground is like cement for about 15" !
My OEM Teeth on the Bucket are wearing some, not enough to get me to jump at a new set, unless it was a low price, but I thinking on getting something sooner than later !
Ground is like cement for about 15" !
My OEM Teeth on the Bucket are wearing some, not enough to get me to jump at a new set, unless it was a low price, but I thinking on getting something sooner than later !
Imold
Platinum Member
- Joined
- Jul 23, 2019
- Messages
- 806
- Location
- West Central Mn.
- Tractor
- MF GC1705, Cub Cadet RZTL, Husqvarna Rider.
They make the Piranha bar 33 inches up to 110 inches, I would think they would make a smaller one for a BH bucket, give them a call and maybe you would be the 1st, who knows I think it would be a asset on a BH.
Jim.
Imold
Platinum Member
- Joined
- Jul 23, 2019
- Messages
- 806
- Location
- West Central Mn.
- Tractor
- MF GC1705, Cub Cadet RZTL, Husqvarna Rider.
Being able to use the straight blade is nice plus you don’t need to store it anywhere unless you need to use the whole bucket.
Jim.
Scrambler82
Veteran Member
Thx for the reply.
I need a 12" unit,
The SoCal ground, and as I have stated before, is like cement, and I need something that will tear into the ground with the slightest of pressure from the BH... that my friends would be the best thing ever.
Since I have started reading this Thread, I have thought on the idea... maybe it is time to react to it !
Ltr
Added: 9/12/19, 1530 hrs.
I sent an e-mail to BXpander, asking about three of their Tools:
1) Piranha Tooth Bar in a 12" model for a BH.
2) BH Ripper for the Max28.
3) FEL Expander for the Max28.
I am really not expecting a good response but the tool ideas are great.
Last edited:
Imold
Platinum Member
- Joined
- Jul 23, 2019
- Messages
- 806
- Location
- West Central Mn.
- Tractor
- MF GC1705, Cub Cadet RZTL, Husqvarna Rider.
Think I will make it out today now that it is not raining anymore and it is drying out, will give the PB a good first workout this afternoon on that area of briars/brush or as I call it thatch.
Jim.
Jim.
Imold
Platinum Member
- Joined
- Jul 23, 2019
- Messages
- 806
- Location
- West Central Mn.
- Tractor
- MF GC1705, Cub Cadet RZTL, Husqvarna Rider.
Well I got out for a bit before it started to rain.
Just starting.
Jim.
Will not let me load two other pics at this time.
Just starting.
Jim.
Will not let me load two other pics at this time.
Last edited:
