Todays shop time.

[dragoneggs]

Not tractor stuff but shop time. Same glass co needed some adjustment knobs for a Chinese glass grinding machine. Apparently hard to get the parts from the manufacturer. Made up four. View attachment 659020View attachment 659021

really nice work.

 

[Big Barn]

Not tractor stuff but shop time. Same glass co needed some adjustment knobs for a Chinese glass grinding machine. Apparently hard to get the parts from the manufacturer. Made up four. View attachment 659020View attachment 659021

Beautiful!

 

[metalbender]

This stuff for the glass place has put my cowboy wok project on the "back burner" along with the fel snow blower. Wok only needs handles, watched some tube vids, looking forward to some delicious breakfasts.

 

[metalbender]

Finished up the set screw holes, power tap to the rescue

 

[dragoneggs]

Neat setup. My opinion would be add doors to minimize dust. Plus they'll look great seeing the rest of your creations do.

Okay Mike... thought about the dust and took your advice. Added the doors under the sink and now just need to fabricate some non snagging low profile handles for the doors, and also for the drawers on my drill press cabinet. I don't know about you all's luck but I can snag anything when I not trying. Wish I was as good a fisherman! And hey... there's one of my many tape measurers that never seem to be close at hand when I need one!

 

[KubotainNH]

Okay Mike... thought about the dust and took your advice. Added the doors under the sink and now just need to fabricate some non snagging low profile handles for the doors, and also for the drawers on my drill press cabinet. I don't know about you all's luck but I can snag anything when I not trying. Wish I was as good a fisherman! And hey... there's one of my many tape measurers that never seem to be close at hand when I need one!

:thumbsup: As usual it looks great. Looks like you enjoy working with wood, I prefer metal but do like the look of wood. I just don't like the finish work.

 

[dragoneggs]

:thumbsup: As usual it looks great. Looks like you enjoy working with wood, I prefer metal but do like the look of wood. I just don't like the finish work.

Thank you... I like working with both. I tend to run with one and then switch over for a change of pace and as projects dictate.

 

[Big Barn]

Okay Mike... thought about the dust and took your advice. Added the doors under the sink and now just need to fabricate some non snagging low profile handles for the doors, and also for the drawers on my drill press cabinet. I don't know about you all's luck but I can snag anything when I not trying. Wish I was as good a fisherman! And hey... there's one of my many tape measurers that never seem to be close at hand when I need one!

View attachment 659308

You’re doing all my woodworking going forward.

 

[LS Tractor Owner]

Did these end tables a little while ago. I have a bunch of 2 1/4 inch oak, joined it up, then through the planer. I still have to make the doors, they will have metal inserts.

 

[LS Tractor Owner]

Now, if I can find the time, I want to start a land plane project. I have all the metal, just need to get it cut to size and welded up. A lot easier said than done.