Smart Shop tips!

[bindian]

Perhaps not shop per se'..... but when I open a bottle (gallon) of bar oil for my chainsaws, I take the cap off but instead of taking the seal under it off, I punch a hole in it with a Phillips so now I have a much more controlled flow of oil into the saw.

Dad got me using a gear oil empty bottle, the ones with the pointed squirt tip and replaceable cap, to fill the chain saw with oil. It is fast and no spills. I still carry the gallon jug to refill the gear oil bottle in my chain saw milk crate. The milk crate has everything needed for the saw and also some neon orange felling wedges.
hugs, Brandi

 

[bindian]

Hi Brandi, exactly my plan when I built the vise stands was to add a hitch receiver to my 4x8 steel table. Due to my tight confines, I just couldn't easily come up with a design that didn't compromise space for other 'implements'.

I did add a hitch receiver to the front of my BX that has come in handy. I have to drop the bucket to use it but with a QA, it's quick. :laughing:

I have been wanting to make a bench grinder mount that swings out and up to use, then stows back under the bench. Just too too many projects ahead of it.

I have a half inch steel plate just begging me to start on my welding table.
hugs, Brandi

 

[JK22]

My last post reminded me of this Youtube video by King's Fine Woodworking on cleaning your bar clamps. I do this when they start bugging me and it works great. He also demonstrates the relative strength of various solvents which I found informative.

83 - How to Clean Dried Glue from Parallel Clamps and make them slide Better Than New - YouTube

Cool tip. I’m liking this thread. Waiting to see some really ingenious idea though that make me want to run out to my shop and implement right away.

 

[dragoneggs]

Cool tip. I’m liking this thread. Waiting to see some really ingenious idea though that make me want to run out to my shop and implement right away.

Sounds like a challenge! :licking:

 

[Gem99ultra]

How about LID LIFTERS for plastic 20 liter pails?

View attachment 659264

View attachment 659265
View attachment 659266

What a novel idea! I hate to admit in being so ignorant about there even being such a thing as a 'lid lifter', but I will. Just this week I fought a plastic can with a lid for about a half hour. Finally got out my sabre saw and cut the dang thing off. Silly me. I'll be buying one of those - as soon as I find them for sale. Thanks for the tip.

 

[dragoneggs]

Everyone probably already knows this, but since I was spray painting a bit last night...

First, start spraying before aiming at the project and make light full passes. After using spray rattle cans, turn them upside down and spray until the paint stops flowing. This obviously clears the tip for next time. Caution however... there are certain rattle cans that this doesn't work but it usually says on the can that it sprays in any direction.

 

[Big Barn]

For all position rattle cans I clean and soak the nozzles in solvent.


Rattle can shaker.

 

[dragoneggs]

For all position rattle cans I clean and soak the nozzles in solvent.

View attachment 659583
Rattle can shaker.

View attachment 659584

Ha ha. Never thought to put a rattle can in a shaker!

 

[bigtiller]

Shaking up a spray can is one of the hardest things for me to do. Arthritic wrist. I need/want a can shaker like BB's.

 

[Richard]

Speaking of spray cans.... I've got a neighbor who keeps all the spray TIPS from these type things. I thought that was a good idea so started tossing them into a drawer literally a couple weeks ago.

I go to store to get some goodies, end up bringing my first ever, can of Kroil home. I think it cost me $25 for the can. I am replacing the King Pin on my backhoe and it's STUCK so we've been heating, cutting, heating, squirting oil....

So I go to pull the brand new "if this won't do it nothing will" Kroil out.... pop the top off......and there is NO spray tip in there!!!

ARGGGGG

Wait! I just prior, started to keep those, so I smugly go up to toolbox, open drawer and there two of them are.....grab one..... it doesn't fit.

WHAT?

I grab the other....and IT won't fit.

Seems the Kroil stem that comes out of the can is ever so slightly larger than the tips I had saved.

My pal who's helping me with the welding & doing some machining for me took the can with him and brought back two new tips for it along with the extension tube.

So now, I'm becoming a fan of keeping the old tips when you're done with the can.