New PT-180 owner

   / New PT-180 owner
  • Thread Starter
#143  
So... It looks like I will be getting a second one and mounting both. MVIMG_20200817_183337.jpg
 
   / New PT-180 owner #144  
Curtjeep. What circuit are tying into? There is a lot of fluid dynamics goung on and i wonder if whatever system you are hooking into can take the reduced flow that will happen from two coolers. Thise coolers are id’d as the same size as your hoses?
 
   / New PT-180 owner
  • Thread Starter
#145  
Curtjeep. What circuit are tying into? There is a lot of fluid dynamics goung on and i wonder if whatever system you are hooking into can take the reduced flow that will happen from two coolers. Thise coolers are id’d as the same size as your hoses?
I'm tying into the return line from the loader. The Id, according to the website is the same size, but it looks small... I haven't measured yet.
 
   / New PT-180 owner #146  
Keep all the hose bends gradual with no 90 deg. fittings. You could mount the one you have, keeping in mind in your engineering that you want to add a 2nd, and see how it works. Considering where you are using it, I would think you will need all you can get. Think about it, my fan comes on when the hyd oil temp eventually rises to 100 deg. (measured at the loader valve). Your ambient temp could be 100 deg. when you start, going up from there!
 
   / New PT-180 owner
  • Thread Starter
#147  
Keep all the hose bends gradual with no 90 deg. fittings. You could mount the one you have, keeping in mind in your engineering that you want to add a 2nd, and see how it works. Considering where you are using it, I would think you will need all you can get. Think about it, my fan comes on when the hyd oil temp eventually rises to 100 deg. (measured at the loader valve). Your ambient temp could be 100 deg. when you start, going up from there!
It is 100 when I start, haha...
 
   / New PT-180 owner #148  
Keep all the hose bends gradual with no 90 deg. fittings.

If you need to accomplish a 90deg w a fitting, some times it's just necessary, use the more expensive swept curve (metal tubing) ones. Not the drilled/brazed ones. The sweeps are significantly less resistant to flow so they add less heat to the fluid.
 
   / New PT-180 owner
  • Thread Starter
#149  
If you need to accomplish a 90deg w a fitting, some times it's just necessary, use the more expensive swept curve (metal tubing) ones. Not the drilled/brazed ones. The sweeps are significantly less resistant to flow so they add less heat to the fluid.
Thanks, I will. This weekend is go time I think. I have a buddy bringing his old volvo for me to do some work on, I am installing new kitchen appliances, and I am hopefully putting my cooler on...
 
   / New PT-180 owner
  • Thread Starter
#150  
I see we have a great professional here in the company. It is really great. May I contact you for help.
You weren't referring to me were you??? I promise the last thing I am is a profeasional!! More of a jack of all trades and master of none... I know enough to get myself into trouble on most of my projects.
 

Tractor & Equipment Auctions

Adams FL24 Fertilizer Conveyor - 24IN Belt, Predator Engine, 2IN Hitch, Refurbished by Manufacturer (A51039)
Adams FL24...
2007 Volvo VNL Truck Tractor (A51039)
2007 Volvo VNL...
2015 Chevrolet Tahoe SUV (A50324)
2015 Chevrolet...
2012 KENWORTH T800 DAYCAB (INOPERABLE) (A50854)
2012 KENWORTH T800...
2020 CATERPILLAR Tl1255D TELESCOPIC FORKLIFT (A51242)
2020 CATERPILLAR...
GENERAC MAGNUM LIGTH PLANT (A50854)
GENERAC MAGNUM...
 
Top