can someone explain the purpose/benefit of this design?

   / can someone explain the purpose/benefit of this design? #1  

disney

Gold Member
Joined
Aug 11, 2012
Messages
378
Location
orlando fl
Tractor
scag turf tiger 61" #2, gx95, sold f525 twice, f725 sold
Why is the front upper rail extended beyond the flooring? I was thinking maybe it would let you pull something with a bumper a little further, but I think most small lawn mowers, or even 4wheelers have so little overhang that they would drive off the deck before hitting the cross bar. I believe the winch was added by the owner, not the factory.

gal1.jpg

gal2.jpg

gal3.jpg
 
   / can someone explain the purpose/benefit of this design? #2  
Can't help with the trailer but I was wondering about he copper loop on the wall.
Is it part of a heating system?
 
   / can someone explain the purpose/benefit of this design?
  • Thread Starter
#3  
Can't help with the trailer but I was wondering about he copper loop on the wall.
Is it part of a heating system?

I noticed that also, but the pictures came from a local for sale posting, so I have no additional information.
 
   / can someone explain the purpose/benefit of this design? #4  
Why is the front upper rail extended beyond the flooring? I was thinking maybe it would let you pull something with a bumper a little further, but I think most small lawn mowers, or even 4wheelers have so little overhang that they would drive off the deck before hitting the cross bar. I believe the winch was added by the owner, not the factory.

View attachment 672581

View attachment 672585

View attachment 672586

Looks like it was designed for a boat. Slide your gator catcher in.

http://www.continentaltrailers.com/galvanized-atvandutilitytrailers.htm
 
   / can someone explain the purpose/benefit of this design? #5  
Ya it gives you a little extra room......
 
   / can someone explain the purpose/benefit of this design? #6  
I can't imagine why the trailer is built that way other than they could. The piping on the wall looks like a compressed air cooler/dryer but I should see a drip leg there but don't.
 
   / can someone explain the purpose/benefit of this design? #7  
The welder did not have a square :laughing::laughing:
 
   / can someone explain the purpose/benefit of this design? #8  
Seems to be built for something specific as the axle placement would be hard to balance average loads. If price is right, would be worth purchasing. If I were to purchase it, I would be sliding the axles rearward a bit. JM2C.
 
   / can someone explain the purpose/benefit of this design? #10  
My guess is that it allows whatever is driven onto there, more space to move forward.

When I load my tractor onto my trailer, I drive it all the way forward until I hit the front railing. With this set up, I would be farther forward and not have my bushhog tailwheel hanging off the back of my 16ft trailer.
 

Tractor & Equipment Auctions

ST205/75R15 Trailer Tires (A55787)
ST205/75R15...
(49) 2" X 3" X 21" TUBING (A54756)
(49) 2" X 3" X 21"...
UNUSED LANDHONOR 3.5X2X2M GREENHOUSE (A54757)
UNUSED LANDHONOR...
2017 Ford Explorer SUV (A55758)
2017 Ford Explorer...
Advance SC750 28in Floor Scrubber (A53421)
Advance SC750 28in...
UNUSED IRANCH IRMC HIGH END ELECTRIC MASSAGE CHAIR (A54757)
UNUSED IRANCH IRMC...
 
Top