can someone explain the purpose/benefit of this design?

   / can someone explain the purpose/benefit of this design? #1  

disney

Gold Member
Joined
Aug 11, 2012
Messages
378
Location
orlando fl
Tractor
scag turf tiger 61" #2, gx95, sold f525 twice, f725 sold
Why is the front upper rail extended beyond the flooring? I was thinking maybe it would let you pull something with a bumper a little further, but I think most small lawn mowers, or even 4wheelers have so little overhang that they would drive off the deck before hitting the cross bar. I believe the winch was added by the owner, not the factory.

gal1.jpg

gal2.jpg

gal3.jpg
 
   / can someone explain the purpose/benefit of this design? #2  
Can't help with the trailer but I was wondering about he copper loop on the wall.
Is it part of a heating system?
 
   / can someone explain the purpose/benefit of this design?
  • Thread Starter
#3  
Can't help with the trailer but I was wondering about he copper loop on the wall.
Is it part of a heating system?

I noticed that also, but the pictures came from a local for sale posting, so I have no additional information.
 
   / can someone explain the purpose/benefit of this design? #4  
Why is the front upper rail extended beyond the flooring? I was thinking maybe it would let you pull something with a bumper a little further, but I think most small lawn mowers, or even 4wheelers have so little overhang that they would drive off the deck before hitting the cross bar. I believe the winch was added by the owner, not the factory.

View attachment 672581

View attachment 672585

View attachment 672586

Looks like it was designed for a boat. Slide your gator catcher in.

http://www.continentaltrailers.com/galvanized-atvandutilitytrailers.htm
 
   / can someone explain the purpose/benefit of this design? #5  
Ya it gives you a little extra room......
 
   / can someone explain the purpose/benefit of this design? #6  
I can't imagine why the trailer is built that way other than they could. The piping on the wall looks like a compressed air cooler/dryer but I should see a drip leg there but don't.
 
   / can someone explain the purpose/benefit of this design? #7  
The welder did not have a square :laughing::laughing:
 
   / can someone explain the purpose/benefit of this design? #8  
Seems to be built for something specific as the axle placement would be hard to balance average loads. If price is right, would be worth purchasing. If I were to purchase it, I would be sliding the axles rearward a bit. JM2C.
 
   / can someone explain the purpose/benefit of this design? #10  
My guess is that it allows whatever is driven onto there, more space to move forward.

When I load my tractor onto my trailer, I drive it all the way forward until I hit the front railing. With this set up, I would be farther forward and not have my bushhog tailwheel hanging off the back of my 16ft trailer.
 

Tractor & Equipment Auctions

King Kutter TG72 Rotary Tiller Tractor Attachment (A55851)
King Kutter TG72...
2024 Wanco WCTS-SM4A-730 800W Solar Integrator Trailer (A51691)
2024 Wanco...
KJ 7'x20' Metal Farm Driveway Gate (A53316)
KJ 7'x20' Metal...
2016 E-Z Beever M12R Towable Brush Chipper (A50322)
2016 E-Z Beever...
S/N: 2453707 ***FRONT COVER NOT ATTACHED*** (A55853)
S/N: 2453707...
Shell Vintage Decorative Fuel Pump (A55758)
Shell Vintage...
 
Top