is there a Loader To Skid Steer Quick Attach for DL100 FEL ?

[Dmacleo]

know there are kits for DL95 not sure they would work on DL100

 

[MoMower]

My solution was to sell my 1710 and by a 1723, lol.

There is one member here who fabricated his own ssqa.

I would imagine there’s a solution out there.

 

[Dmacleo]

LOL its a long term thought esp since would req buying another bucket. yeah looking at bosses new 1723 tlb got me wondering LOL
plus set of bobcat pallet forks sitting here all the time...
for time being guess I'll just grab a set of bolt on pallet forks.

 

[Snobdds]

My solution was to sell my 1710 and by a 1723, lol.

There is one member here who fabricated his own ssqa.

I would imagine there’s a solution out there.

It appears that the Iseki tractors made in Japan are better quality than the new GC's make in India. Have you found this to be true?

 

[WranglerX]

My manual for the DL95 and DL100 FEL's seems to indicate there is a after market SSQA system available.... Might want to talk to any "good" MF dealer....

Dale

 

[cglaser104]

There is not an OEM solution for the DL100 like there is for the DL95 or FL1805. I have seen aftermarket conversions however.

 

[not2old]

I made my own because all the aftermarket ones I was able to find, moved the bucket farther away from the pins and weighed too much. I was unwilling to lose 100 lbs. or more of lift capacity. I chose a Massey over a Kubota because of this ability and it's still not enough.

 

[MoMower]

It appears that the Iseki tractors made in Japan are better quality than the new GC's make in India. Have you found this to be true?

Mine is a 2019, as far as I know, still Iseki made. No issues with the 1710 at about 550-600 hours when I sold it, or the 1723 in the 235 hours so far.

 

[cglaser104]

Mine is a 2019, as far as I know, still Iseki made. No issues with the 1710 at about 550-600 hours when I sold it, or the 1723 in the 235 hours so far.

They are all made by Iseki, what changed is Iseki was going to start doing some manufacturing in India and ...drawing a blank here... Australia maybe?

Anyhow, I haven't heard any complaints about a change in quality with the tractors themselves. The only complaints I've seen in very limited amounts was about the backhoe ram's and joysticks linkages on the valve bodies failing on a small batch of CB65 backhoes where the implement manufacturer subbed some parts and had bad castings. AGCO(MF)/Iseki was aware of these instances and addressing them last I had read.

 

[Cat385B]

This outfit has a bunch, the DL100 is not listed. Contacting them may be worth your time.

All Other Tractor Loader QA Adapter Plates- Ask Tractor Mike

 

[Cat385B]

Or here:

ATI Tach-All Universal Skid Steer Quick Attach Hitch for tractor loaders

 

[coolconnection]

Mine is a 2019, as far as I know, still Iseki made. No issues with the 1710 at about 550-600 hours when I sold it, or the 1723 in the 235 hours so far.

Agricultural equipment producer Iseki will expand its Indonesian plant for tractors sold in North America and Asia by 40% next year as demand plateaus in Japan.
Big difference of what country they are made in. I have a 2019 GC1723E and so far so good but it is still new.

 

[Dmacleo]

been looking at a bunch and guess its not for me, was more idle curiosity than anything I guess.
not only would I have to by the plate but I would also have to buy a bucket before I could even use it.

 

[cglaser104]

been looking at a bunch and guess its not for me, was more idle curiosity than anything I guess.
not only would I have to by the plate but I would also have to buy a bucket before I could even use it.

You can cut off the ears and weld on a conversion plate to your existing bucket. All told regardless it's a good $500 and some welding/refab work