New Branson 2610H owner

   / New Branson 2610H owner #21  
John is a good dealer in most ways.
You have a pretty good trip to get down to him.
 
   / New Branson 2610H owner
  • Thread Starter
#22  
John is a good dealer in most ways.
You have a pretty good trip to get down to him.

John is great in my opinion took very good care of me and put up with me I'm not the easiest person to deal with when buying stuff like this he even went out of his normal supplier chain to get me the Artillian Forks and Grapple that I wanted.

I would recommend him to anyone looking for a Branson tractor, Mad dog zero turn Zeter tractor, Cam Trailer, or anything tractor related.

It's about an hour fifteen minute trip for me from door to door but worth it.
 
   / New Branson 2610H owner #23  
I bought the Artillian frame and forks directly from Artillian. I bought the 3k lb setup (frame and 48" forks).

I've been looking at the grapple too, but still not sure I can use it enough to justify buying it. Have very few trees to deal with at the new place.

Which grapple combination did you end up going with? I do like the mix and match concept of the individual pieces.
 
   / New Branson 2610H owner
  • Thread Starter
#24  
I bought the Artillian frame and forks directly from Artillian. I bought the 3k lb setup (frame and 48" forks).

I've been looking at the grapple too, but still not sure I can use it enough to justify buying it. Have very few trees to deal with at the new place.

Which grapple combination did you end up going with? I do like the mix and match concept of the individual pieces.

I want forks and a grapple and was buying both though the dealer with the tractor purchases as two different attachments the more I thought about and the more I researched it kept leaning to the Artillian because of the design and be able to use the 3000lb frame with both and less space needed to store the attachment I wasn't using. I have about 3 acres of woods I want to clean up that why I wanted a grapple once that done I wasn't sure if I would have used it any longer so I just went with 2 floor/rake section and one grapple section and if it becomes something I really like and thinks I can use a lot more I can always get a grapple section.
140202706_1215311678864122_8828598830067836960_n.jpg
 

Tractor & Equipment Auctions

BROCE BROOM RCT 250 SWEEPER (A51242)
BROCE BROOM RCT...
2013 INTERNATIONAL PAYSTAR DAY CAB ROAD TRACTOR (A51406)
2013 INTERNATIONAL...
Mitsubishi FG35 Forklift - 8,000lb Lift Capacity, LP Gas (A52128)
Mitsubishi FG35...
Toro Workman Low Profile Spray system 200 (A50322)
Toro Workman Low...
2018 CATERPILLAR D6T LGP CRAWLER DOZER (A51242)
2018 CATERPILLAR...
2013 Chevrolet Caprice Sedan (A50324)
2013 Chevrolet...
 
Top