New MX5400

   / New MX5400 #71  
I hope I'm happy with this as well; given that the rotary will cut heavier material, and higher, I won't have to stress if I can't get to mowing right away. 30 acres of mowing isn't something I want to rule my life. :confused3:

Congrats on the new tractor Steppenwolfe :thumbsup: Out of curisosity, why did you decide to go with a rotary cutter instead of a flail mower?
 
   / New MX5400
  • Thread Starter
#72  
Congrats on the new tractor Steppenwolfe :thumbsup: Out of curisosity, why did you decide to go with a rotary cutter instead of a flail mower?

12ft of cutting! And... I thought (hope) it would perhaps be more kind to turtles and snakes out and about. I'll probably leave it at 6 inches mowing height.
 
   / New MX5400 #73  
How's the 12 set up? 3x4' or do they do 6+6? One "wing". Either way you'll have a good time - 12' at a time. :laughing:
I had a 15' and lots of rocks poking up, that really kept me busy "flapping" my wings over the rocks, but man your getting it done compared to a 8' bushog.
 
   / New MX5400
  • Thread Starter
#74  
How's the 12 set up? 3x4' or do they do 6+6? One "wing". Either way you'll have a good time - 12' at a time. :laughing:
I had a 15' and lots of rocks poking up, that really kept me busy "flapping" my wings over the rocks, but man your getting it done compared to a 8' bushog.

I think at 60 inch in the middle with two 48's on the sides. Haven't hooked her up yet. AND... IT WAS ONLY A 5FT BUSH HOG... :confused2:
 
   / New MX5400
  • Thread Starter
#75  
Pic from the dealer parking lot...
 

Attachments

  • mower6.jpg
    mower6.jpg
    667.9 KB · Views: 145
   / New MX5400 #76  
You'll be fine. A pull behind mower is a piece of cake compared a 3pt. Just always use whatever (mechanical) wing lock (in the up or transport position) or your hyd. lines will be under pressure for re-connecting.
(If it's like my old Woods)
 
   / New MX5400
  • Thread Starter
#77  
You'll be fine. A pull behind mower is a piece of cake compared a 3pt. Just always use whatever (mechanical) wing lock (in the up or transport position) or your hyd. lines will be under pressure for re-connecting.

Roger that :thumbsup: Can't wait to mow some grass...
 
   / New MX5400 #78  
While you're waiting for greener pastures, go get a pretty orange canopy and a fan for that hot VA sun. :thumbsup:
 
   / New MX5400 #79  
There's a pretty good thread on TBN about mounting a canopy fan

 

Tractor & Equipment Auctions

2006 MACK CV713 KILL TRUCK (A52472)
2006 MACK CV713...
2001 Ford F150 (A50121)
2001 Ford F150...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
2017 Rogator RG1300B Dry Fertilizer Applicator (A52748)
2017 Rogator...
2020 KUBOTA RTV X1100C UTV (A51406)
2020 KUBOTA RTV...
2019 Ford E-450 Super Duty Passenger Bus (A51692)
2019 Ford E-450...
 
Top