Home-made attachments...

[JDAOWNER]

YES-TPH- THREE POINT HITCH---SORRY. --IT CAN, AND IT HAS BE USED ON THE KIOTI. BUT I WOULD LIKE A TPH MOWER FOR MOWING AROUND A POND, BACK UP TO EDGE AND DROP IT AND DRIVE OUT. ALSO THE TIRES ARE NOT LOADED, SO WOULD USE IT FOR BALLAST IF NEEDED. ALSO THE DRAW BAR ON THE KIOTI IS LOWER THAN ON THE JD--JOHN DEERE-- PUTTING THE FRONT OF THE MOWER PRETTY LOW. I DON'T DO A LOT OF MOWING SO I COULD PICK UP AN OLDER MOWER, BUT THE KING KUTTER HAS AN 80 HORSE POWER GEAR BOX, A SLIP CLUTCH AND I JUST WENT THROUGH IT LAST WINTER. IT'S IN VERY GOOD SHAPE. I WOULD LIKE TO HANG ONTO IT AND I DON'T WANT TWO.

THANKS FOR YOUR RESPONSE.

 

[bcp]

Darn! I wanted to see a mower that needed a Toilet Paper Holder.

Bruce

 

[ptsg]

Darn! I wanted to see a mower that needed a Toilet Paper Holder.

Bruce

Are you looking for new ways to store all the toilet paper you bought during the pandemic? :laughing:

 

[JDAOWNER]

I TOOK THE TOOL BOX OUT FROM UNDER THE STEP, AND INSTALLED A TPH---TOILET PAPER HANDLER. I REWIRED THE FRONT HYDRAULICS SO WHEN I PUSH THE BUTTON, IT UNROLLS AUTOMATICALLY. EACH TIME I PUSH THE BUTTON IT UNROLLS ABOUT A ROLL AND A HALF. TOO MUCH FOR ONE----DISCHARGE. STILL A WORK IN PROGRESS. I WAS GOING TO PUT IT ON THE MOWER NEXT TO THE SEAT, BUT DON'T ALWAYS HAVE THE MOWER ON. SORRY NO PICS THEY WOULD LET ME POST.

 

[bmaverick]

Three point hitch?

Or 3PH

 

[Jstpssng]

I TOOK THE TOOL BOX OUT FROM UNDER THE STEP, AND INSTALLED A TPH---TOILET PAPER HANDLER. I REWIRED THE FRONT HYDRAULICS SO WHEN I PUSH THE BUTTON, IT UNROLLS AUTOMATICALLY. EACH TIME I PUSH THE BUTTON IT UNROLLS ABOUT A ROLL AND A HALF. TOO MUCH FOR ONE----DISCHARGE. STILL A WORK IN PROGRESS. I WAS GOING TO PUT IT ON THE MOWER NEXT TO THE SEAT, BUT DON'T ALWAYS HAVE THE MOWER ON. SORRY NO PICS THEY WOULD LET ME POST.

I think that we can envision it, and that's enough. :laughing: :cool2:


As far as converting your tagalong; it seems like buying something like this King Kutter Carry All, Model CA | Northern Tool and attaching it to the mower would be the easiest. It might still require some modification but the advantage is that you could take it off and use it for other applications if you wanted to.

 

[Gordon Gould]

Darn! I wanted to see a mower that needed a Toilet Paper Holder.

Bruce

Come see mine - I'll make sure the TPH has a full roll.

gg

 

[JDAOWNER]

I think that we can envision it, and that's enough. :laughing: :cool2:


As far as converting your tagalong; it seems like buying something like this King Kutter Carry All, Model CA | Northern Tool and attaching it to the mower would be the easiest. It might still require some modification but the advantage is that you could take it off and use it for other applications if you wanted to.

I'VE THOUGHT ABOUT BUILDING SOMETHING LIKE THAT, ALL I WOULD HAVE TO DO IS REMOVE THE TOUNG FROM THE MOWER.

 

[bmaverick]

This is a home-made attachment to go with the T-paper roles

 

[PILOON]

I love to DIY!

My cab is DIY
Heater is DIY
3 pt weight is DIY
Snow plow DIY
Camera DIY
LED lighting DIY
Snow blower rotation is DIY
Radio is DIY
Strobe is DIY

As soon as all the snow is gone I'll take a few photos that might ignite some ideas for you all.