Yanmar led's

   / Yanmar led's #32  
You need to replace that tractor--It shakes the camera too much. :giggle:
 
   / Yanmar led's
  • Thread Starter
#34  
Update, one of my fancy new led's has already failed.... will wait and see if the second one fails to before deciding whether to replace w the same or try another route.
 
   / Yanmar led's #35  
Update, one of my fancy new led's has already failed.... will wait and see if the second one fails to before deciding whether to replace w the same or try another route.

Have you taken the LED out and bench tested to ensure it quit? I've found that vibration and/or heat kills LEDs over time. Or another thing is a spike in voltages. A small resistor will extend the LED life to years, but it will slightly loose some of it's brilliance.
 
   / Yanmar led's
  • Thread Starter
#36  
Swapped it from right to left... enough testing for me...
 
   / Yanmar led's #37  
Probably cheap solder joints.
 

Tractor & Equipment Auctions

UNUSED FUTURE 12" HYD AUGER (A52706)
UNUSED FUTURE 12"...
2011 Ford E-350 Passenger Van (A53422)
2011 Ford E-350...
20 ft. Shipping Container (A53117)
20 ft. Shipping...
Deere 35G (A53317)
Deere 35G (A53317)
48in Farm Jack (A55852)
48in Farm Jack...
(2) CAM2 HI TEMP LITHIUM COMPLEX GREASE DRUMS (A54757)
(2) CAM2 HI TEMP...
 
Top