What have you done with/to your GC Series 2300, 2400, 1700 Tractor TODAY

[kenmbz]

Ordered the Flail (Betstco 48 HD) yesterday. Now need to build out something to hold BackHoe and Flail.
Thank you MoMower for the answers and pics.

 

[Pixguy]

I love my Massey but this machine was quite nice. Rental to put in irrigation.

 

[kenmbz]

Well, at least it's Red

 

[MoMower]

Stump grinding clean up and ready for seed.

 

[kenmbz]

took down three more trees today, tractor to move rounds and clean up.
At this rate with dead ash, might need a bigger saw, 20" 50cc looks small in the picture

 

[MoMower]

Pool excavate and level today.

 

[kenmbz]

First time getting 3pt set up took a while. BH off, 3pt down and attached to flail and then reassemble.
Got Flail running and did some cutting and adjusted height. Will need some more adjusting but is cutting well.
Need to get used to not having BH on.

 

[Pixguy]

View attachment 702611
First time getting 3pt set up took a while. BH off, 3pt down and attached to flail and then reassemble.
Got Flail running and did some cutting and adjusted height. Will need some more adjusting but is cutting well.
Need to get used to not having BH on.

Wowwwww, I forget when mine was so clean and "unscraped."

 

[MoMower]

View attachment 702611
First time getting 3pt set up took a while. BH off, 3pt down and attached to flail and then reassemble.
Got Flail running and did some cutting and adjusted height. Will need some more adjusting but is cutting well.
Need to get used to not having BH on.

I lowered the roller all the way and the ski to the middle setting. Gave a good 3” or so height after cutting.

 

[kenmbz]

I have the roller all the way and ski up to top -1, Next time I hook it up I will try it and put to your setting if too high.
Thanks for the advice. How is your Flail holding up?