Pull start
- Thread starter Mary J
- Start date
- Views: 1697
Richard
Super Member
- Joined
- Apr 6, 2000
- Messages
- 5,046
- Location
- Knoxville, TN
- Tractor
- International 1066 Full sized JCB Loader/Backhoe and a John Deere 430 to mow with
No idea but I've put our IH 444 behind my backhoe and pull started it. (someone on it of course)
Tx Jim
New Member
Welcome to TBN
NO!!! hyd pump needs to provide hyd pressure to engage shuttle clutch plates in order for transmission to transfer power to turn engine crankshaft.
NO!!! hyd pump needs to provide hyd pressure to engage shuttle clutch plates in order for transmission to transfer power to turn engine crankshaft.
jeff9366
Super Star Member
- Joined
- Jan 14, 2011
- Messages
- 12,787
- Tractor
- Kubota Tractor Loader L3560 HST+ ~~~~~~~~~~~~~ 3,700 pounds bare tractor, 5,400 pounds operating weight, 37 horsepower
What transmission does your IH 444 have?
Richard
Super Member
- Joined
- Apr 6, 2000
- Messages
- 5,046
- Location
- Knoxville, TN
- Tractor
- International 1066 Full sized JCB Loader/Backhoe and a John Deere 430 to mow with
Gear drive. Looking at these other responses, I'm guessing his isn't.
JWR
Elite Member
- Joined
- Apr 19, 2011
- Messages
- 4,022
- Location
- So MD / WV
- Tractor
- MF 2660 LP, 3 Kubota B2150, Kubota BX2200, MH Pacer, Gravely 5660, etc.
Std Trans tractors can be pull-started (or coasting & pop the clutch) but not HSTs.
MHarryE
Elite Member
- Joined
- Feb 15, 2009
- Messages
- 2,974
- Location
- Northeastern Minnesota
- Tractor
- Kubota M7-171, M5-111, SVL75-2, RTV900XT & GR2120; CaseIH 1680 combine
Not with hydraulic clutch packs - need hydraulic pressure to engage clutch.
