I love watching stuff like this on youtube

[GeneV]

 

[Cycledude]

Incredible !

 

[MossRoad]

Would have never thought about that. I'd have use a torch and coat hanger if I didn't have a mig welder.

 

[Vigo327]

I laughed my ass off before nodding in grim approval. As someone who loves to go around throwing off conventional wisdom and making it work anyway, this feels like getting a high five from a like-minded *******.

 

[CalG]

Steel belted tires...after a brush fire? ;-)

 

[Rustyiron]

Steel belted tires...after a brush fire? ;-)

That's what I was wondering too. You may have nailed it Cal

 

[rScotty]

Ugh,,, those are some pretty terrible looking "welds". Not too useful.
Most guys who can weld are able to do far better with a torch and just about any metal ....a coat hanger or mild steel wire of any kind.
rScotty

 

[GeneV]

I like watching youtube welding and fabrication channels from eastern europe, se asia, middle east, etc. They make do with what they got, they're pretty inventive with it.

 

[GeneV]

Ugh,,, those are some pretty terrible looking "welds". Not too useful.
Most guys who can weld are able to do far better with a torch and just about any metal ....a coat hanger or mild steel wire of any kind.
rScotty

Ok well, he's got a grinder. The point of the vid is to fill holes. He's made his point, I think. Anyways, if you didn't like that one, you're gonna hate this one:

 

[rScotty]

Ok well, he's got a grinder. The point of the vid is to fill holes. He's made his point, I think. Anyways, if you didn't like that one, you're gonna hate this one:

I don't hate it when I see crappy work. It just makes me wonder why they choose to do it that way. As long as people have been doing work you can see examples where some do it neatly and some not. It goes back to arrowheads and cave paintings.... and probably even before.
I always wonder if it is in how they learned or something innate in the person.

 

[stuckmotor]

I was hoping to learn that a heavy coat of rust on a single strand served as a poor man's flux coat.

 

[GeneV]

I don't hate it when I see crappy work. It just makes me wonder why they choose to do it that way. As long as people have been doing work you can see examples where some do it neatly and some not. It goes back to arrowheads and cave paintings.... and probably even before.
I always wonder if it is in how they learned or something innate in the person.

Well, as a self-taught *grinder*, I could attest that welding ugly is definitely a learned trait.

 

[stuckmotor]

Would that technipque qualify to be called Texas Tig?

 

[Tinhack]

Would that technipque qualify to be called Texas Tig?

Of course not. We use old barbed wire.

 

[Nutcracker]

YouTube, is about all I watch. I love it. I have welded with a stick rod for 50 plus years and use a filler sometimes, but not exactly like that. I will try that.

 

[shaeff]

I'm with the torch and coat hanger gang. I mean, it's neat I guess, but it's basically just using the wire as a backer to pull some heat away and stop the weld from dropping through the thin metal. :drifts off remembering the old brass coat hangers worked better than the new ones:

 

[MossRoad]

I'm with the torch and coat hanger gang. I mean, it's neat I guess, but it's basically just using the wire as a backer to pull some heat away and stop the weld from dropping through the thin metal. :drifts off remembering the old brass coat hangers worked better than the new ones:

I've never had much luck with the coat hangers.... the plastic keeps melting.

But seriously, when I find the thicker metal coat hangers at our house, it reminds me of days gone by. I've always kept a tube of "real" rods in the garage near the torches since I could afford them, but the coat hangars bring back that memory of making do with what we had at the time.

 

[GeneV]

Would that technipque qualify to be called Texas Tig?

I mean, kinda? In murka, tx tig usually means pounding the flux off a second rod to use as a filler. Or, use a nail or something.

Here's another dude I watch, I think he's Egyptian. I thought this was really smart:

 

[Nutcracker]

When I needed a flush surface, that is the method I preferred.

 

[Raul-02]

I don't hate it when I see crappy work. It just makes me wonder why they choose to do it that way.

HAHA I bet he's got zero inclusions and holds tolerances closer than 80 millionths with that burr.