weld shop clean out job and other Keweenaw sites
- Thread starter ArlyA
- Start date
- Views: 34593
5030
Epic Contributor
- Joined
- Feb 21, 2003
- Messages
- 26,997
- Location
- SE Michigan in the middle of nowhere
- Tractor
- Kubota M9000 HDCC3 M9000 HDC
Don't believe that applies but I'll leave it at that.
D2Cat
Platinum Member
- Joined
- Nov 6, 2014
- Messages
- 764
- Location
- 50 miles south of Kansas City
- Tractor
- Case730, Deutz 6206, Cat D2, Kubota L305, Kubota L4240, Kubota B7100HST, Kubota TG1860G, TG1860D
Since you didn't read the background of why he was there and you wanted to know, why not just end the question with a period after the word liquidation? Much less confrontational.
5030
Epic Contributor
- Joined
- Feb 21, 2003
- Messages
- 26,997
- Location
- SE Michigan in the middle of nowhere
- Tractor
- Kubota M9000 HDCC3 M9000 HDC
Whatever, I'm done with the thread anyway. I was interested in the radial drill but no response on that. Not that far from him either.
OP
ArlyA
Super Star Member
- Joined
- Mar 18, 2016
- Messages
- 12,293
- Tractor
- Outlander1000 6x6, Ego lawn mower and shopping for tractor
Got a few more pics for you guys today. 
A CNC lathe and my boss had been there over the weekend piling up steel but it will take me time to edit them. Glad everyone is being civil here.
A CNC lathe and my boss had been there over the weekend piling up steel but it will take me time to edit them. Glad everyone is being civil here.
OP
ArlyA
Super Star Member
- Joined
- Mar 18, 2016
- Messages
- 12,293
- Tractor
- Outlander1000 6x6, Ego lawn mower and shopping for tractor
I already posted a pic of this lathe but this one is better.
Who needs tooling?
A more modern one.
Who needs tooling?
A more modern one.
OP
ArlyA
Super Star Member
- Joined
- Mar 18, 2016
- Messages
- 12,293
- Tractor
- Outlander1000 6x6, Ego lawn mower and shopping for tractor
Tools, parts and machines all around this place.
BravoXray
Elite Member
- Joined
- Dec 17, 2019
- Messages
- 2,694
- Location
- Nothern Indiana
- Tractor
- Kubota BX2230, John Deere 430 Diesel
Yeah, it's really good that I'm 600 miles from you.
Is that one lathe a turret lathe? Looks like a real beast.
The press with town rams is something I've not seen before.
That last picture of misc. drops would look good next to my lathe.
Is that one lathe a turret lathe? Looks like a real beast.
The press with town rams is something I've not seen before.
That last picture of misc. drops would look good next to my lathe.
OP
ArlyA
Super Star Member
- Joined
- Mar 18, 2016
- Messages
- 12,293
- Tractor
- Outlander1000 6x6, Ego lawn mower and shopping for tractor
My boss was here over the weekend and digging out steel and congregating it some.
Freeze crack? This tubing is 1/4 wall 6x6 square.
Freeze crack? This tubing is 1/4 wall 6x6 square.
flyerdan
Veteran Member
It's possible; is it right next to the weld seam?
A lot of times we'd get ornamental iron railing back into the shop after water would freeze in some of the pickets and balloon them out at the bottom.
Whenever I'd build OI I always drilled at the bottom for anything to drain, it also served to vent during powdercoating so if there was a pinhole oily air wouldn't come out and blem the finish.
A lot of times we'd get ornamental iron railing back into the shop after water would freeze in some of the pickets and balloon them out at the bottom.
Whenever I'd build OI I always drilled at the bottom for anything to drain, it also served to vent during powdercoating so if there was a pinhole oily air wouldn't come out and blem the finish.
