3-Point Hitch MF 2660 3 pt. lift will not operate

   / MF 2660 3 pt. lift will not operate
  • Thread Starter
#21  
Yep. Could very well be [bent]. It is going to be hard to get in there to get enough visibility to find out. Is yours a cab or platform model ?
 
   / MF 2660 3 pt. lift will not operate #22  
I have a platform tractor.

If the problem is interference inside the bore in the "hydraulic lift cover" that the control tube and rod pass through - and that is the most logical conclusion I can come up with - or which otherwise requires me to raise the cover to get into the internals then it is a job well beyond my means!
 
   / MF 2660 3 pt. lift will not operate
  • Thread Starter
#23  
I have a platform tractor.

If the problem is interference inside the bore in the top cover that the control tube and rod pass through - and that is the most logical conclusion I can come up with - or which otherwise requires me to raise the top cover then it is a job well beyond my means!
You and me both ! I'd hate to have to dig in there even if it is "just" under the seat sheet metal and not internal to the chassis.

Mine is platform also. It is a "low profile" model but in these tractors that just meant lower diameter rear tires, some fender and floor features, one less step climbing up to the seat and few if any real serious mechanical differences.
 

Tractor & Equipment Auctions

2022 John Deere 4044M (A47307)
2022 John Deere...
2007 Ford Expedition XLT 4x4 SUV (A46684)
2007 Ford...
2009 Peterbilt 384 T/A Wet Kit Day Cab Truck Tactor (A46683)
2009 Peterbilt 384...
2015 Chevrolet 2500 HD (A47307)
2015 Chevrolet...
2017 Ford F-150 XL 4x4 Ext. Cab Pickup Truck (A46684)
2017 Ford F-150 XL...
2016 Chevrolet Camaro 1LT Coupe (A46684)
2016 Chevrolet...
 
Top