weld shop clean out job and other Keweenaw sites

[ArlyA]

Gee, I know this was a tough one but no guesses? Here is a clue while looking at the buildings outside.

When your car frame isn't strong enough, you add a turnbuckle rod.

 

[BravoXray]

Coal bunker?

 

[jjeff]

Pump house, or a building that runs the/ winches that
raise and lower the cables for the ore skips and man baskets/ elevators?? I believe they used to call them engine houses? Maybe a poiler used to run ventilation fans? Many Interesting things on a site like that.

 

[ArlyA]

Pump house, or a building that runs the/ winches that
raise and lower the cables for the ore skips and man baskets/ elevators?? I believe they used to call them engine houses? Maybe a boiler used to run ventilation fans? Many Interesting things on a site like that.

This is the engine or hoist building. Its the largest steam powered hoist in the world.

-------------From wiki----------------------
No. 2 Quincy Shaft-Rockhouse was built for Quincy's deepest mine. It extended over 9,000 feet at an angle and reached a total depth of 6,225 feet below the Earth's surface. It was built in 1908 during some of Quincy's most productive years. Production stopped at this Shaft-Rockhouse in 1945.

 

[ArlyA]

Coal bunker?

Correct, it was the boiler for the steam hoist. The trussle wood is gone but the cars are to dump coal into the bunkers.

 

[ArlyA]

More Quincy photos I took, but forgot to post. Note this is made from rail iron. Do you guys know how it was used?

 

[shooterdon]

This is a great thread!!!

Love seeing old stuff like this.

 

[ArlyA]

Looks like I might be done at the Quincy job, but here is a few more photos I took while there.

 

[herm0016]

yes, it's really big. oh how I miss the UP. going to visit this feb. for the copper dog race and skiing at bohemia. should be fun.

 

[herm0016]

More Quincy photos I took, but forgot to post. Note this is made from rail iron. Do you guys know how it was used?View attachment 766549View attachment 766550

looks like mucking to me. i want to see the bender they used though!