Joisey
Member
The threads look like they were cut with a brick.
Please tell me this is not the way oil filters are made...
- Thread starter sixdogs
- Start date
- Views: 47004
Joisey
Member
Did you notice that the end of the filter media are just overlapped, not epoxied together or fastened together with a metal clip? The oil will find its way past that area in a hurry.
Some people like AC, others Fram or Motorcraft. The guy that did the machine work on my race engines recommended Lee oil filters. They would filter better and take more pressure before the filter can ruptured or the media ruptured, allowing dirty oil to get past the filter media. Never had a bearing or any engine problem from using lowly Lee oil filters.
- Joined
- Feb 21, 2003
- Messages
- 26,972
- Location
- SE Michigan in the middle of nowhere
- Tractor
- Kubota M9000 HDCC3 M9000 HDC
Fram is the pits. Having said that however their air filters are pretty good. I wonder if those are on Mahindra tractors?
m5040
Platinum Member
- Joined
- Nov 23, 2008
- Messages
- 997
- Location
- CT
- Tractor
- Kubota M6040 L2250, JohnDeere 310D, Ford 841 Elenco, Ford 961, Trapmaster, PT180 w/LM bucket and 45" brush cutter, PT1430 Deutz w/grapple bucket, Antonio Carraro Tigrecar 6500. John Deere 5300. Former owned Steiner 430 max, Goldoni REV Maxter 7
Pay the extra for OEM filters and sleep well
- Joined
- Feb 21, 2003
- Messages
- 26,972
- Location
- SE Michigan in the middle of nowhere
- Tractor
- Kubota M9000 HDCC3 M9000 HDC
Not all that much more actually.
m5040
Platinum Member
- Joined
- Nov 23, 2008
- Messages
- 997
- Location
- CT
- Tractor
- Kubota M6040 L2250, JohnDeere 310D, Ford 841 Elenco, Ford 961, Trapmaster, PT180 w/LM bucket and 45" brush cutter, PT1430 Deutz w/grapple bucket, Antonio Carraro Tigrecar 6500. John Deere 5300. Former owned Steiner 430 max, Goldoni REV Maxter 7
When I had to buy filters for my Mack EM6300, OEM Mack filters were cheaper at the dealer then NAPA!!!
Gord Baker
Platinum Member
No loud music in the shop or long hair. No one watching their cell phone. Lots of employment, super efficient.
This is why I never pre fill a filter when installing it.
cqaigy2
Super Member
Especially the cell phones. Why don't you pre fill a filter?
Gord Baker
Platinum Member
There are no doubt many bits of metal remaining inside those filters and I don't want them pumped into the system which could happen if they were prefilled. Some large Engine suppliers are specific about this.
