MItsubishi D1800 miss and white smoke

[thepumpguysc]

Way to go Bmav.!!

 

[Ster1]

Coming up empty handed, called all of those sources. Thanks for the list maverick! Stevens is going to call me back, but everyone else said no. The gasket I measured at .05". I have some gasket material around here that's .03", which, if my math is right, would change timing about 5 degrees. That should be enough to see a difference. If it runs better, I'll find something thinner. If it runs worse, I'll double up the gasket, and see what happens. I'm not sure what else to do.

 

[thepumpguysc]

That’s a good idea..
Remember, DO NOT GOBB ON ANY SEALER..
It WILL change the timing..

Good luck

 

[Ster1]

That’s a good idea..
Remember, DO NOT GOBB ON ANY SEALER..
It WILL change the timing..

Good luck

Thanks! I made a comment earlier about my returns. I'm not seeing hardly any fuel coming back out of the injectors except just a tiny bit at full throttle. What are your thoughts on that?

 

[thepumpguysc]

THATS not a problem at all..
It’s just excess fuel that’s being returned..
some are more than others.

 

[Ster1]

Thanks again! Now is the wait for parts. I hope the next post is all about a completed project

 

[bmaverick]

Way to go Bmav.!!

It's pinned at the top of this Mitsubishi section. Take a look, it could help you with you work too. Or if you have further details, we an add more content.

 

[bmaverick]

Thanks again! Now is the wait for parts. I hope the next post is all about a completed project

Ah, I thought this thread was in the Mitsubishi section. Go here for the helpful PDF file.

MITSUBISHI - SATOH TRACTOR INFORMATION, PARTS, AND SUPPORT - updated - REV 3.21

The MITSUBISHI - SATOH TRACTOR INFORMATION, PARTS, AND SUPPORT.PDF has finally been updated. It's no longer in that difficult to read and no possible to search older PDF format. Edwin Krampitz wrote the first edition. He did a fine job at it. However, Ed Krampitz tractor historian passed...

www.tractorbynet.com

 

[Ster1]

Ah, I thought this thread was in the Mitsubishi section. Go here for the helpful PDF file.

MITSUBISHI - SATOH TRACTOR INFORMATION, PARTS, AND SUPPORT - updated - REV 3.21

The MITSUBISHI - SATOH TRACTOR INFORMATION, PARTS, AND SUPPORT.PDF has finally been updated. It's no longer in that difficult to read and no possible to search older PDF format. Edwin Krampitz wrote the first edition. He did a fine job at it. However, Ed Krampitz tractor historian passed...

www.tractorbynet.com

I actually already had it, but thanks for posting all that good info!

 

[bmaverick]

I actually already had it, but thanks for posting all that good info!

Make sure you got the latest, version 3.21 is the latest and many things were updated.