Calibration rear Lift New Holland T7530 2007 mod
- Thread starter Bjørn
- Start date
- Views: 5008
LouNY
Super Star Member
- Joined
- Jul 4, 2015
- Messages
- 12,344
- Location
- Greenwich, NY
- Tractor
- Branson 8050, IH 574, Oliver 1550 Diesel Utility (traded in on Branson) NH 8160. Kioti CK2620SECH
You will most likely need the service manual for your tractor, occasionally the operators manual will have the procedure.
At times you can find free or low cost downloadable manuals.
My older NH has several pages of trouble shooting and calibration for the hitch control.
At times you can find free or low cost downloadable manuals.
My older NH has several pages of trouble shooting and calibration for the hitch control.
I have the Service manual and the operator manual but its not explaned how to calibrate.. I hope there is someone could send me the procedure
LouNY
Super Star Member
- Joined
- Jul 4, 2015
- Messages
- 12,344
- Location
- Greenwich, NY
- Tractor
- Branson 8050, IH 574, Oliver 1550 Diesel Utility (traded in on Branson) NH 8160. Kioti CK2620SECH
This is from the T6050 manual, it may help? The calibration procedure was buried in the back of the electrical section
Thank you
I will take a look at this.Hi Again 
I tried to calibrate when using yours procedure but it will not came up with this Cal mode.
It is a bit different from yours Tractor . Do you think it can be done by using Diagnostic tool ? Thx for your help
I tried to calibrate when using yours procedure but it will not came up with this Cal mode.It is a bit different from yours Tractor . Do you think it can be done by using Diagnostic tool ? Thx for your help
LouNY
Super Star Member
- Joined
- Jul 4, 2015
- Messages
- 12,344
- Location
- Greenwich, NY
- Tractor
- Branson 8050, IH 574, Oliver 1550 Diesel Utility (traded in on Branson) NH 8160. Kioti CK2620SECH
Should be but the steps and procedure may be different.