Deck Over vs Equipment Trailer w/ Fenders

[dieselscout80]

If both trailer styles deck over vs equipment trailer with fenders are the same specifications (length, axles & ramps ect) which will weigh more?

Deck over style

Flatbed Goosenecks & Deck-Overs Trailers for Sale - Big Tex

Discover a wide selection of flatbed gooseneck and deck-over trailers at Big Tex Trailers. Find the perfect trailer for your hauling needs today!

www.bigtextrailers.com

Equipment style trailers

Equipment Trailers & Tilt Trailers For Sale - Big Tex Trailers

Big Tex Trailers offers quality Equipment & Tilt Trailers for hauling machinery, vehicles and more. Boost efficiency. Easy loading and unloading. Learn more!

www.bigtextrailers.com

I understand the benefits of both but unsure about the weight comparison.

The examples are bumper pull but the question applies to gooseneck trailers too.

 

[David in KY]

Not answering your question (yet), but have you considered one of these:

Big Tex Trailers | Tilt Trailers
Big Tex Trailers 16TL Super Duty Tilt Bed Equipment Trailer

I just bought one of these, based upon using them several times for mini-excavators from rental shops.
I love the ease of loading and unloading.

 

[ning]

I'm guessing deckover because there's a lot more volume of deck

 

[notaz3]

The deck-over will have the higher weight because the width. I too can say that the tilt bed is the way to go. Seconds to load and no lifting or moving ramps.

 

[dieselscout80]

The deck-over will have the higher weight because the width. I too can say that the tilt bed is the way to go. Seconds to load and no lifting or moving ramps.

I was thinking that too.

 

[Fixastuff]

I too can say that the tilt bed is the way to go. Seconds to load and no lifting or moving ramps.

They are easy to use but heavy, taking away load capacity.

 

[mikester]

Why guess? The spec sheets are posted - now compare actual weights of the units you want.

 

[scaredychicken]

If both trailer styles deck over vs equipment trailer with fenders are the same specifications (length, axles & ramps ect) which will weigh more?

Deck over style

Flatbed Goosenecks & Deck-Overs Trailers for Sale - Big Tex

Discover a wide selection of flatbed gooseneck and deck-over trailers at Big Tex Trailers. Find the perfect trailer for your hauling needs today!

www.bigtextrailers.com

Equipment style trailers

Equipment Trailers & Tilt Trailers For Sale - Big Tex Trailers

Big Tex Trailers offers quality Equipment & Tilt Trailers for hauling machinery, vehicles and more. Boost efficiency. Easy loading and unloading. Learn more!

www.bigtextrailers.com

I understand the benefits of both but unsure about the weight comparison.

The examples are bumper pull but the question applies to gooseneck trailers too.

if i'm reading those two links properly, the trailer weights are noted in the specs.
my preference is the lower profile equipment haulers... centre of gravity as low as possible is my goal

 

[steve tym]

A word about tilt decks. When you load them, keep the weight as close to the hinge point as possible while tilting the deck, up or down. I loaded my tractor all the way to the front of the trailer while tilted, then when I lowered the deck, I bent the lifting gear. I should have loaded the tractor so it was equal weight both sides of the hinge, lowered the deck, then moved the tractor into position. Expensive lesson learned.

 

[dieselscout80]

if i'm reading those two links properly, the trailer weights are noted in the specs.
my preference is the lower profile equipment haulers... centre of gravity as low as possible is my goal

Those are just examples l’m likely to buy a used trailer.

My current 18’ trailer (16’ flat with 2’ dovetail and 7k lbs) is a little small in both length and weight capacity.