Fuddyduddy1952
Elite Member
- Joined
- Aug 10, 2022
- Messages
- 3,035
- Tractor
- john deere
Will this fit?
$700 muffler?!? :o
- Thread starter macindude
- Start date
- Views: 4184
Williy
Elite Member
- Joined
- Apr 26, 2020
- Messages
- 3,586
- Location
- Texas
- Tractor
- Yanmar YT 235C Yannar YRC 60 rotary cutter, Yanmar RT72 rotary tiller B75 Backhoe & bucket & thumb, LS land grader
MacinDude have you checked out the Farm Fleet stores there in
Wisconsin? The one in Fond du Lac Farm Fleet has a very large
selection of exhaust parts many years ago maybe they still do???
willy
Wisconsin? The one in Fond du Lac Farm Fleet has a very large
selection of exhaust parts many years ago maybe they still do???
willy
Paystar
Elite Member
I once needed a muffler for a Craftsman lawn tractor back in early 2000's and they wanted $400 for it back then.
So my small engine mechanic made a new metal box, welded the head pipes to it, filled it with steel wool and it worked great and was quiet.
So my small engine mechanic made a new metal box, welded the head pipes to it, filled it with steel wool and it worked great and was quiet.
thepumpguysc
Elite Member
New Perkins muffler is 3K.!!
Fuddyduddy1952
Elite Member
- Joined
- Aug 10, 2022
- Messages
- 3,035
- Tractor
- john deere
- Joined
- Sep 6, 2011
- Messages
- 6,201
- Location
- Philadelphia
- Tractor
- John Deere 3033R, 855 MFWD, 757 ZTrak; IH Cub Cadet 123
Oh, the neighbors would love that at half past dawn on Saturday morning!
Williy
Elite Member
- Joined
- Apr 26, 2020
- Messages
- 3,586
- Location
- Texas
- Tractor
- Yanmar YT 235C Yannar YRC 60 rotary cutter, Yanmar RT72 rotary tiller B75 Backhoe & bucket & thumb, LS land grader
If there is just a hole in it find some asbestis to cover the
hole and put a tin can or some metal over to hold it in place
and hold this in place with some large hose clamps
willy
hole and put a tin can or some metal over to hold it in place
and hold this in place with some large hose clamps
willy
California
Super Star Member
- Joined
- Jan 22, 2004
- Messages
- 14,948
- Location
- An hour north of San Francisco
- Tractor
- Yanmar YM240 Yanmar YM186D
I love my elderly Yanmar tractors. Replica muffler assemblies are available and are under $100.
But today at 40 years old neither needs its muffler replaced.
But today at 40 years old neither needs its muffler replaced.
Last edited:
Yes, it's very similar to that. That'd probably fit the engine, but it'd melt my hood. LOL
The original Simplicity part has an exhaust pipe that comes from the side of the muffler, not the end, and extends down to just below the front bumper, exhausting forward.
Now, since I'm not exactly going to be entering this thing in any tractor shows I could probably just take a hole saw and punch a hole in the side of the hood where this one exhausts, if I can't find the original part.
Sadly, I do not have the skills to fab my own just yet. I have already gained too many new skills in the course of this project!
Sadly, no. This is a Command series, not Courage. Even if the pipes were in the right place for the engine, it doesn't look like it'd fit under the hood.
Oooh, good call. I don't know that I've ever specifically seen exhaust parts, but I have definitely been pleasantly surprised to find some things at Fleet Farm.
At least, I hope it was Fleet Farm you saw them at and not Farm & Fleet - We have both, they are different, and we can't keep them straight either.
But it looks like there's a Fleet Farm in Fond du Lac, hopefully the same one you visited many years ago. Some of their newer stores (Oconomowoc and West Bend at least) are huge - like, bigger than a Wal-Mart Supercenter - and have an amazing selection. Equipment, guns, parts, tools, grills, etc... Pretty fun place to waste an hour or two. Thanks for the excuse to visit. 