Saw that one of our Arleigh Burke DDGs got attacked in the Red Sea - I wonder what effect that will have on metals prices?
actually a wonderful story of the bad guys taking over a tanker they thought was attached to Israel, our fleet hears about it, bears down
on those fools in that Arleigh Burke at 30 knots, bad guys all try to escape or give up.
It must be an amazing sight to see a modern destroyer aimed right at you...
lot of shorts changing I bet
then more bad guys shot some missiles off at the destroyer, never got close
good morning all. 40 going up to 50 in clouds and maybe a peek of sun.
happy to report that I got the toilet out all by myself, very hard to get the floor bolts out, no room
drenched the whole area in sanitizer, realized I needed another part. So back to hardware store this morning and hopefully today
the toilet will be done. I'm not sure I can go with pex, oem is not pex but water tubing using pex "like" connectors. Does not work well, but pex
doesn't bend well either so I understand why it was easier to fit this all with flex pipe.
I will use pex if I can, might need to add some 90's to make it work. Have lots of good quality brass connectors, trying to get rid of the plastic.
had to chuckle, the best connection I made was the ugliest, that pex to water hose, but pex slid in tightly into other hose, I used the right all types plastic
adhesive and then put a clamp on it while glue dried. It's not going anywhere, but it does look Rube Goldberg so maybe they will get fixed today. I have a few Sharkbite fittings I could use, maybe.