Good morning!!!!

[scootr]

Productive day. I moved the mowers through the shop. While touching up the cutting edges on the flail mower I found a split hammer and replaced it. Glad to get that before it got worse. Then hard-faced the skids on both mowers, grease and oil. They are ready to go. Fields are getting green.

 

[sodamo]

The Apple menu has now shown a recovery contact invitation for software that suddenly showed up
No way to delete it and I don’t want to open it
Any ideas on what to do to get rid of it
It shows on the pc as well as phone

Frits, not seeing anything like that either on my ipad or iphone.

 

[daugen]

Drew, curious did you get your dual speakers working?
What were your thoughts on my usb hub/dongle suggestion?

can easily toggle back and forth, but not both at once.
I did not see your suggestion; sorry.
is this what you were mentioning:

https://www.amazon.com/Extender-Spl...=usb+hub+multiport&qid=1704148469&sr=8-3&th=1​

cheap enough, worth a try.

 

[sodamo]

can easily toggle back and forth, but not both at once.
I did not see your suggestion; sorry.
is this what you were mentioning:

https://www.amazon.com/Extender-Spl...=usb+hub+multiport&qid=1704148469&sr=8-3&th=1​

cheap enough, worth a try.

Yup, something similar, lots of choices. I agree, inexpensive to try.

 

[buckeyefarmer]

Had few snow flurries today, just enough to notice. can't get pellet stove to light, will have to mess with it.

 

[Thomas]

Special thoughts prayers for BIL LS.

 

[PJSprog]

28°F and cloudy this morning, getting up to 38° today.

I started feeling better a few days ago, but the Wife's progress has been a bit slower. She's still fighting the coughing.

Three day weekend is over now. Back to work tomorrow, and "the long drought" before the next holiday, which is Memorial Day at the end of May.

Happy New Year, gents.

 

[scott_vt]

Good Evening Guys,
A nice sunset for the first day of 2024 !

Also got the front legs for the sculptured rocking chairs to the point were they are ready for turning the tapers on the lathe !
Where is Phil, when I could use him ?

Hope all have a good evening!

 

[Wagtail]

Good (Tuesday) morning. Overnight Low of 17.8C and it's presently 23.7C, overcast with the odd gust of wind.

Yesterday, after replacing all of my calendars & tabulating last year's rainfall total (758.6mm) I decided to mow the property with the Z-turn; house/driveway/horse exercise area/front paddock. It took about 1.5hrs. Thank goodness I bought that Z-turn a couple of years ago.

I'm not sure what I'll get up to today. My Mate has just headed into town for a haircut/car wash & a few groceries to tide us over 'til tomorrow's 'real' into-town trip.

That's about it, take care all.

 

[Looking4new]

I have 2 spare pedestal sump pumps. Seems to be a good plan to have 2 spares. They have been spares for over 30 years.

I miss the old GSW pumps.
Dad had installed a Otacko piston pump in the house I grew older in. You knew when the sump pump came on, thumpa, thumpa very softly.
He put another piston pump up in the attic right beside the 55 gallon barrel that held our toilet flushing water. It had a micro switch on it and when the barrel got low enough the pump would suck up the water out of the well and fill the barrel. He eventually plumbed the bath tub into the system