Alan46
Elite Member
Went to Costco ( first time in months) spent $610.
What did you buy this week?
- Thread starter Yander
- Start date
- Views: 466510
MadJack
Silver Member
Zerk fittings... SAE and metric.
When the tractor needs greasin' and they ain't taking it, it's time.
When the tractor needs greasin' and they ain't taking it, it's time.
OP
Yander
Elite Member
Not hard to do there. We go there every couple or three weeks and usually don't walk out with less than $400 bill.
masseyrider
Elite Member
Amateurs!
seville009
Veteran Member
- Joined
- Oct 22, 2007
- Messages
- 2,093
Going through the zero turn yesterday greasing it up, etc to start the season. One of the idler pulleys on the mower deck had broken and was sticking up.
Dealer about 25 miles away had a bunch in stock, so ran over to get one. Decided to buy two to have a spare in case one of the other pulleys breaks.
Get home and go put the new spare idler pulley on my shelf of spare parts. What do I see? A spare pulley sitting there. I seem to recall having to replace one years ago, so I must’ve bought a spare one back then too.
Dealer about 25 miles away had a bunch in stock, so ran over to get one. Decided to buy two to have a spare in case one of the other pulleys breaks.
Get home and go put the new spare idler pulley on my shelf of spare parts. What do I see? A spare pulley sitting there. I seem to recall having to replace one years ago, so I must’ve bought a spare one back then too.
ultrarunner
Epic Contributor
- Joined
- Apr 6, 2004
- Messages
- 28,645
- Tractor
- Cat D3, Deere 110 TLB, Kubota BX23 and L3800 and RTV900 with restored 1948 Deere M, 1949 Farmall Cub, 1953 Ford Jubliee and 1957 Ford 740 Row Crop, Craftsman Mower, Deere 350C Dozer 50 assorted vehicles from 1905 to 2006
Good insurance…
scaredychicken
Veteran Member
- Joined
- Jul 21, 2012
- Messages
- 2,252
- Location
- Salmon Arm BC, Canada
- Tractor
- John Deere 160 (1988), Arctic Cat 400 ATV (2006), Kubota BX23S (2018), Jacobsen Super Chief 1450 (1969), Cub Cadet RZT S50 zero turn mower (2012)
about a month ago I bought an 18v cordless Milwaukee Drill / Driver package ... but i used it for the first time YESTERDAY It will be very useful around here
It will be very useful around herekozal01
Platinum Member
Picked up a new 5’ box blade for my CX
scootr
Super Member
- Joined
- Aug 9, 2022
- Messages
- 8,360
- Location
- Temecula California
- Tractor
- Kubota MX5200 HST, 773 Bobcat, Cat forklift
You have just insured that you will never need to replace it again!
Murphy's law lol
gsganzer
Elite Member
- Joined
- Jun 11, 2003
- Messages
- 4,056
- Location
- Denton, TX
- Tractor
- L3800 w/FEL and BH77, BX 2200 w/FEL and MMM
Ain't that the truth!
